Bedienungsanleitung Strong SRT 80 (Seite 10 von 17) (Englisch)

568531

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

PART 1 • English

English

function. The default LCN setting is made by the country setting. The default setting can be overruled in this

menu, by setting the LCN Mode on/o.

6.0 TIME

6.1 Time mainmenu

The time menu allows you to set GMT Usage, Time Zone, Date, Time, SleepTime, Summer Time and AdvTimer. Press

MENU to enter the Main menu and tu to highlight Time, then press q to enter the Time menu. Press pq to

highlight the desired item and press OK to enter the sub-menu. Press EXIT toexit.

GMT Usage: This menu is used to select the usage of GMT. The options are: OFF/ON. Default is ON, the

GMT time is set by the broadcaster’snetwork.

Time Zone: This menu is valid only when selected “ON” in GMT Usage menu. The Time Zone range is

“-12:00 ~ +12:00”, increasing half hour progressively. Default time zones are according to

the country setting in the Installation menu, but can be overruled here. The default time

setting is best leftunchanged.

Set Date: This menu is valid only when “OFF” is selected in GMT Usage. Press the0~9 buttons to input

thedate.

Set Time: This menu is valid only when “OFF” is selected in GMT Usage. Press the 0~9 buttons to

input thetime.

Sleep Time: This menu allows you to set the Sleep Time. The options are OFF/60/120/180 minutes. After

this time has passed the unit enters tostandby.

Summer Time: Daylight Saving Time. This menu allows you to set the Summer Time. The options are

OFF/ON. If GMT Usage was set to “ON”, then the broadcaster will control the switch to

Summertime.

Adv Timer: This menu allows you to set the Advanced Recorder Schedule Mode. When in the Timer

window, press OK to add a timed event. Use the navigation buttons, to set the channel

type and number, start and end time, mode, timermode.

Once: one timeprogramming

Weekly: Every week, same day, same time, samechannel.

Weekend day: Every Saturday and Sunday, same time, samechannel.

Weekday: Every Mon, Tue, Wed, Thu, Friday: same time, samechannel.

Daily: Every day, same time, samechannel.

A timer event can be removed with the REDbutton.

NOTE: To make a recording a USB device must be connected and the timer mode must be set to

‘Recorder’, otherwise the unit will only wake up on the channel set, but notrecord.

7.0 TVSETUP

7.1 TV setup mainmenu

The TV setup menu allows you to set TV Format, TVMode, Video Output, TV Resolution, OSD Transparency and

Banner Display Time. Press MENU to enter the Main menu and tu to highlight TV Setup, then press q to enter the

TV Setup menu. Press pq to highlight the desired item and press OK to enter the sub-menu. Press EXIT toexit.

TV Format: 4:3PSPan&Scan: When a 4:3 TV should be connected, a 16:9 broadcast will be shown as a

centre cut-out, losing image content on the left and theright.

16:9LB Letterbox: When a widescreen TV is connected, a 4:3 broadcast will be shown with black bars left

andright.

16:9FIT: When a widescreen TV is connected, a 4:3 broadcast will be shown stretched from left

toright.

4:3LB Letterbox: When a 4:3 TV should be connected, a 16:9 broadcast will be shown with black bars above

and below, but not losing imagecontent.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 80 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info