480570
9
Zoom out
Zoom in
Vorherige Seite
1/23
Nächste Seite
PART 1 • English
8
Connecting with AV cable
On the back of your receiver you will find the RCA connectors (Audio Left & Right - red & white, Video
- yellow). Install an audio/video cable between the RCA connectors of the receiver and those of your TV
set or amplifier.
Tips: if you have only one audio input on your TV set, then connect Left (White) audio output
of the receiver to audio input of your TV set.
3.3 Connecting to digital audio amplifier
Connect one end of optical cable to S/PDIF output of the receiver. Connect another end of cable to
S/PDIF input of digital audio amplifier.
3.4 Connecting of external USB memory device
Extrernal USB memory device should correspond to USB 2.0 standard and it’s power consumption
should be not more than 500 mA. External USB memory device can be used for software update (see
part 5.4.4 of this manual for details). New software versions are published on the web site www.strong.tv
(support > download).
4.0 FIRST TIME INSTALLATION
Check correctness of all connections. If you are not sure, ask professional installer to install your
equipment. Make sure that power cord is connected to the mains power. Power on your receiver, then
turn on your TV set. On TV screen will be displayed menu “Select your language” of the installation
wizard. The installation wizard will help you to quickly setup your receiver and start to watch
programmes.
4.1 Language select
Use buttons pq to select your language and press OK to continue.
4.2 Terrestrial settings
This menu allows you to setup settings specific for your country.
Use buttons pq to select options and buttons tu to change values.
Country: select country corresponded to place of installation. If country is not in the list
– select “Other”.
Antenna power:
select “Enabled” if you do use active antenna with support of power injection
through coaxial cable. Make sure your antenna supplied by 5 V DC and earns
not more than 50 mA. If you use passive antenna or your antenna is powered
by an external power – select “Disabled
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Strong SRT 8010 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info