Bedienungsanleitung Strong SRT 8106 (Seite 16 von 23) (Englisch)

480567

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

PART 1 • English

English

7.3.2 TV System

Use this menu to match your receiver to your TV set. The following settings are available:

Video Resolution: Toggles between 576i up to 1080p. Please use a setting that matches your

TV’s speciﬁcations. After a selection is made, you will be asked to conﬁrm.

Note: Selection is only applicable on HDMI.

Aspect Mode: Use this option to select the aspect ratio of your TV and the preferred

conversion method. Options are: Auto (automatic detection of aspect ratio),

4:3 Panscan (Displays 16:9 widescreen broadcasts full screen on your 4:3 TV),

4:3 letterbox (black bars on top and under the picture on a 4:3 TV) and 16:9

(use this setting for 16:9 TV sets).

Connection: Use this option to select the connection to your TV set. Select HDMI or TV

SCART.

RF System: When using the built-in RF modulator, you can select here your TV set’s

analogue reception system. Default is PAL-BG.

RF Channel: Set the RF channel of the modulator. Default is channel 38.

Digital Audio Output: Toggles between PCM and Bitstream output. When PCM is selected, all audio

will be converted to stereo audio. Bitstream enables multi-channel audio on

the digital output.

7.3.3 Local Time Setting

Here you can set up your region and time zone.

Region: Use tu to select the region you live in.

GMT Usage: Set to On for broadcaster deﬁned time or to Off to input time and

date manually.

GMT Offset: Allows you to adjust the time zone you live in. This option is only available

when GMT Usage is set to On. The GMT Offset range is "-11:30 ~ +12:00",

increasing by half hours progressively. The cities matching the set GMT Offset

are displayed at the bottom of the screen.

Summer Time: Select Off or On to add one hour extra for summer time during the summer.

Date: Date and Time settings are available only when GMT Usage is set to Off. Use

the 0~9 buttons to enter the date. Press EXIT to proceed.

Time: Date and Time settings are available only when GMT Usage is set to Off. Use

the 0~9 buttons to enter the time. Press EXIT to proceed.

7.3.4 Timer Setting

This menu allows you to set up to 8 timed events for recording or waking up the receiver.

Use pq to select Timer Setting from the System Setup menu and press OK to enter.

The receiver will display a list with 8 timers, followed by their respective status. Select the timer you

wish to set or change with pq and press OK to proceed.

The timer setup menu will now be displayed.

The following settings are available:

Timer Mode: Choose between Off (Timer inactive), Once or Daily (Timer will be executed

every day).

Timer Service: Choose between Channel (Timer will wake up the receiver) or Record (Timer

will start to record the scheduled event).

Wakeup Channel: Use tu to select the channel the timer will wake up with.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8106 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info