568527
10
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
6
PART 2 • English
3.3 Connecting to TV with SCART cable
Fig. 4
Your receiver is also equipped with a SCART connector; alternatively, the TV set can be connected to
the receiver using a good quality SCART cable.
3.4 Connecting to a Digital Audio Amplier with S / PDIF
Fig. 4
By connecting your receiver to a digital amplifier or home theatre system, you can enjoy the best
possible sound quality and multi-channel audio (depending on broadcast). Connect your Digital
Audio Amplifier or home theatre system with a suitable cinch cable to the S / PDIF connector on the
back of the receiver.
3.5 Connecting to a Digital Audio Amplier and TV using
HDMI
Fig. 5
By connecting your receiver to the latest digital amplifiers or Home Cinema systems, preferable
with HDMI connections, you will enjoy the best possible sound quality and multi-channel audio
(depending on broadcast). Connect the HDMI output of the receiver to an input of your amplifier,
and then connect the HDMI output of the amplifier to your TV set. Select the correct input on your
amplifier to watch and listen to programmes.
3.6 Connecting to an analogue Audio Amplier
Fig. 5
Use the 3.5 mm jack to connect your receiver to the analogue input of your Hi-Fi or audio amplifier
with a 3.5 mm jack to RCA cable for achieving best possible analogue audio quality.
3.7 Connecting a USB storage device
Fig. 6
NOTE: It is recommended to use USB 2.0 storage devices or higher for recording
and play back of TV programmes or HD movies.
NOTE: Timeshift/recording and playback only works properly when a fast
USB storage device such as a USB2.0 HDD is connected to the receiver.
Timeshift/recording and playback of HD content requires a sufficient read/
write speed of the used USB storage device.
4.0 STARTING UP FOR THE FIRST TIME
When you use your receiver for the first time, the Welcome “Easy install” menu appears. Use pq to
move the highlight to the setting you wish to alter and use tu to change values. Start by selecting
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Strong SRT 8108 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Strong SRT 8108

Strong SRT 8108 Bedienungsanleitung - Deutsch - 28 seiten

Strong SRT 8108 Bedienungsanleitung - Französisch - 24 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info