Bedienungsanleitung Strong SRT 8108 (Seite 15 von 22) (Englisch)

568527

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

PART 2 • English

English

7.3 LCN. (Logical Channel Numbering)

Some countries and broadcasters use a pre-defined channel order. If LCN (Logical Channel

Numbering) is activated and an LCN signal is provided by the operator, channels will be stored in this

operator defined order. With LCN set to off, this order is ignored, but doing so can lead to missing

channels or illogical channel order.

7.4 Picture

This menu allows you to change default settings according to your screen preferences.

Press tu to select Picture and press OK. Press pq to highlight the submenu of choice and press OK

to select. Press EXIT or MENU to get back to the main menu.

Aspect Ratio: Use this option to select the aspect ratio of your TV and the preferred

conversion method. The options are: 16:9PS, 4:3LB, 4:3 PS, 4:3 Full, 16:9 WS,

Auto, 16:9PB, Auto (automatic detection of aspect ratio), 4:3 Panscan (Displays

16:9 widescreen broadcasts full screen on your 4:3 TV), 4:3 letterbox (black

bars on top and under the picture on a 4:3 TV) and 16:9 (use this setting for

16:9 TV sets). Normal setting would be Auto in case of use with a modern

digital 16:9 screen.

Resolution: Use this option to select the video resolution of your TV screen. The options

are: PAL: 576i, 576p, 720p_50, 1080i_50, 1080p_50,NTSC: 480i, 480p, 720p_60,

1080i_60, 1080p_60.Please use a setting that matches your TV’s specifications.

Selection 720 and higher is only applicable on HDMI output.

TV Format: PAL/NTSC. Select your TV format as in use in your country: For Europe PAL, for

USA NTSC.

Video Output: CVBS/RGB. Use this option if you use the analogue Scart connection to your

TV set. RGB usually provides the best possible analogue quality. However, if

your TV is equipped with an HDMI connector, use that instead.

OSD transparency: To set the OSD transparency from 20% ~ 100% with 20% steps.

7.5 Channel Search

This menu allows you to scan for channels and change default settings for your personal situation.

Press tu to select Channel Search and press OK. Press pq to highlight the submenu of choice and

press OK to select. Press EXIT or MENU to get back to the main menu.

Auto search: Select Auto search if you want to do an automatic scan of all available

channels.

WARNING: All previously stored channels and Favourites are lost.

Manual Search: If you want to scan for a particular programme, or want to manually update

existing channels, you can use the manual scan. Select the channel number

of the wanted channel with tu and press OK. If a valid channel is chosen,

the Quality bar will have read-out, also useful for adjusting your (indoor)

antenna. After the scan is completed the found channels will be added or

updated in the TV and/or Radio list.

Country: Select the country in which the receiver is situated. This setting is important

to the scan process which is executed when searching for (new) channels.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8108 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 8108

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info