568527
18
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
14
PART 2 • English
WARNING! By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. Please use this option with care.
7.8.3 Information
This submenu shows receiver specific information such as hardware version and software version.
Please have the Information screen on hand when you call our hotline. The person who answers your
call might ask for the information given in this screen. Press EXIT to leave.
7.8.4 Auto Standby
Auto Standby is a new feature that helps you reduce power consumption. When set to 1Hour/2 Hours
or 3 Hours, the receiver will switch to standby if it doesn’t receive any commands during this time. Set
Auto Standby to Off to deactivate the automatic standby function. Default is set to 3 hours.
7.8.5 Software Update
OAD, Over Air Distribution
This receiver is equipped with an Over Air Distribution (also called ‘OTA’ Over The Air) software
upgrade function. An ‘Over The Air’ update might not be available in your region. Please visit our
website www.strong.tv or contact your local service hotline for more information about this option.
By selecting ‘On’ the OTA procedure will be executed at the Start Time selected, preferably at night, to
minimise viewing interruption
USB Upgrade
More common way of updating the software, if needed. This feature allows you to upgrade receiver
software via the USB port. When new software is available for your receiver, it can be downloaded
from our website www.strong.tv. Place the software file (unzipped) in the root directory of your USB
storage device (HDD, memory stick etc.) and connect the device to the USB port of the receiver.
Select USB Upgrade from the System menu and press OK to proceed. The upgrade page will now
be displayed. Wait until upgrading finished automatically when the receiver reboots. The ‘Welcome’
screen appears.
NOTE: USB upgrade can only be done from HDD or USB pen drive which is
formatted in FAT32.
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Strong SRT 8108 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Strong SRT 8108

Strong SRT 8108 Bedienungsanleitung - Deutsch - 28 seiten

Strong SRT 8108 Bedienungsanleitung - Französisch - 24 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info