Bedienungsanleitung Strong SRT 8110 (Seite 12 von 15) (Englisch)

480533

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

PART 1 • English

English

OSD Language

Select the preferred language of On Screen Display.

Subtitle Language

Select the preferred subtitle language.

Audio Language

Select the preferred audio language for watching TV channels.

If the language is not available, the default programme language will be used

Digital Audio

Select digital audio output mode

PCM – audio from any format will be converted to PCM format

RAW – audio from receiver will be send in original format

OFF – digital audio output disabled

5.6 System Setting

Press MENU and select System. The menu provides options to adjust the system settings.

Press pq to select an option and press tu to adjust the setting. Press EXIT to exit the menu.

Parental Guidance

You can restrict access to programs that are unsuitable for children below the set age. To restrict/lock the channel you

will need to enter either the default password ‘8888’ or your own password. This function depends from broadcaster. It

will work only if broadcaster assigns morality levels to the programs according to standards.

Set Password

Set or change the password for locked programs and menu access. Enter your old password or the default password

‘8888’. You will then be asked to enter your new password. To conﬁrm re-enter your new password. Once it is conﬁrmed,

press EXIT to exit the menu.

Restore Factory Default

Reset your Set Top Box to the Default Factory Settings.

In Main Menu select Restore Factory Default and press OK or u to select. Enter your password or the default password

‘8888’ and press OK to conﬁrm. This option will delete all preset channels and settings. The receiver will reboots and

start with Installation Guide menu.

Information

View model, hardware and software information.

Software update

If the status is set ON, it will scan new software from broadcast according to your preferred time in Start time.

Software update from USB

Download the required update ﬁle for your receiver model from our website http://www.strong.tv support page or

contact to your local dealer.

Unzip ﬁle, if necessary, and copy it to root folder of your USB storage device.

Connect USB storage device to the USB port of the receiver. Enter to the main Menu, select USB. Select Multimedia –

Music and press OK. In the ﬁle list select ﬁle with software image and press OK to start software update. Update

process will take some time. Once update is completed the receiver will display message “Update completed. Please

restart”. Switch OFF main power and switch it back ON.

WARNING Do not power off your receiver during update process and ﬂashing data. Do not unplug the USB

device during update. This may cause damage of the data in the ﬂash memory and the receiver will

need to be repaired.

5.7 USB

Press MENU and select USB. The menu provides options to playback music and photo ﬁles. Supported are MP3, WMA,

JPEG, BMP ﬁles. The unit supports USB devices with FAT and FAT32 ﬁle systems.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8110 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info