Bedienungsanleitung Strong SRT 8113 (Seite 6 von 26) (Englisch)

568533

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite





1.0 

1.1 



 In a closed or poorly ventilated cabinet; directly on top of or under any other

equipment; on a surface which might obstruct the ventilation slots.



 To direct sunlight or any other equipment that generates heat; to rain or intense

moisture; to intense vibration and to any shock which may cause permanent damage

to your receiver or to any magnetic objects, such as loudspeakers, transformers, etc.

 Do not use a damaged power cord. It may cause a fire or an electric shock. Do not

touch a power cord with wet hands. It may cause an electric shock.

 When the receiver is not used for a long period of time, you should unplug the power

cord from the wall socket.

 Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you

may clean your receiver with a soft lint-free cloth slightly made damp with a mild soap

solution, and only after disconnecting from the mains voltage supply. Make sure no

foreign objects fall through the ventilation slots because this could cause fire or an

electric shock.

 Do not place any objects on top of the receiver because this might prevent proper

cooling of the components inside.



 Never try to open the receiver. It is dangerous to touch the inside of the receiver due to

high voltages and possible electrical hazards. Opening the receiver will void the warranty of

the product. Refer all maintenance or servicing to suitably qualified personnel.

 When you are connecting cables, be sure that the receiver is disconnected from the

mains supply voltage. Wait a few seconds after switching off the receiver before you

move the receiver or disconnect any equipment.

 It is a necessity that you only use an approved extension and compatible wiring that

is suitable for the electrical power consumption of the installed equipment. Please

ensure that the electrical power supply corresponds with the voltage on the electrical

identification plate at the back of the receiver.

If the receiver does not operate normally even after strictly following the instructions in this user

manual, it is recommended to consult your dealer.



Your receiver and its accessories are stored and delivered in a packaging designed to protect against

electric shocks and moisture. When unpacking it, make sure that all the parts are included and keep

the packaging away from children. When transporting the receiver from one place to another or

if you are returning it under warranty conditions, make sure to repack the receiver in its original

packaging with its accessories. Failing to comply with such packaging procedures could damage the

product and void your warranty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8113 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info