Bedienungsanleitung Strong SRT 8113 (Seite 15 von 26) (Englisch)

568533

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite







: Press the "Red" Rename button to open the rename window to rename a

recording.

: Move the highlight to the programme that you want to lock. When pressing

the "Green" Lock button, it will ask you to input password. The default

password is "1234". After input of correct password, the programme is locked.

If you want to unlock the programme, press the "Green" Lock button again.

: Move the highlight to the program me that you want to delete. When

pressing the “Yellow” Delete button, it will ask you to input password. The

default password is "1234". After input of correct password, the programme is

marked with a lock.

If you want to unlock the programme, press the “Yellow” Delete button again

or press  to delete the selected recording(s).

: Return, Stop, one step back or press  to start play mode.



This option shows relevant information about the connected USB storage device.

Also you can format your USB storage device into FAT32.

Select DVR Storage Information from the Media menu and press  to enter.

Now you will see all details as Free and used Recoding Sizes and used file system.

Press the  button Format menu to format the connected USB device.

Please, enter the PIN to access this menu and press  to start formatting.

Select Cancel or press  to leave without formatting.

 Formatting will permanently delete ALL data stored on the connected device.

Please make a backup copy of all data you wish to keep before entering the

Format menu. STRONG cannot be held responsible for loss of data from USB

devices used with this receiver.

 It is possible to use already NTFS formatted USB disks.

Press  to leave.



The DVR Settings menu allows you to setup the Timeshift, Jump function for playback and type

recordings. Select DVR Settings from the Media menu and press  to enter.

Timeshift: On/Off. Select On if you like to activate Timeshift by pressing the 

button. Timeshift will already start in the background directly after you tune

into a channel. Select Off to disable Timeshift. The  button will now

only freeze the TV screen.

Jump: 30 sec to 30 min. Set the time step you like to jump forward or backwards with

the buttons 8 or 7 during playback of recorded files.

Timeshift to Record: On/Off. Select On if you like to keep a copy of the last made Timeshift by

pressing the 4 button. Select Off to disable.

PS Record: On/Off. Select On if you like to reduce recording data. The recording will not

record TXT, extra Subtitles or Audio channels on SD channels. Select Off to

disable and all data of recorded channel will stored to the record.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8113 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info