Bedienungsanleitung Strong SRT 8113 (Seite 19 von 26) (Englisch)

568533

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite









Set this option to On if you connect a second receiver or TV to the loop out (ANT OUT) of this

receiver. This will allow passing antenna signals if the receiver is in standby mode. To reduce power

consumption is default set to Off.

 The Antenna Power supplies (5 Volt) switch off in standby mode. If you are

using an active antenna then the option RF Loop in Standby is not usable.



This menu allows you to manage the system settings of your receiver. It consists of the following

sub-menus: Language, TV System, Display Setting, Local Time Setting, Timer Setting, Parental Lock, OSD

Setting, Favourite List Rename and Multiview Setting.

Press p q to highlight the menu of choice and press  advance to the next screen. Use p q to

move the highlight to the setting of choice. Values can be changed with t u. Press  to leave.



This menu allows you to set up your language preferences.

Language: Use t u to select the language for the On Screen Display.

First Audio: Use t u to select Audio language.

Second Audio: Use t u to select a language that will be played when the language selected

at First Audio isn’t available.

Teletext: Use t u to select the preferred teletext language (when available.)



Use this menu to match your receiver to your TV set. The following settings are available:

Video Resolution: Use this option to select the video resolution of your TV screen. The options

are: By Source (automatic detection of video resolution offered to the

receiver), By Native TV (automatic detection of maximal resolution of TV

screen) and manual selections 480i, 576i up to 1080p. Please use a setting that

matches your TV’s specifications. After a selection is made, you will be asked

to confirm. Selection above 576i is only applicable on HDMI output.

Aspect Mode: Use this option to select the aspect ratio of your TV and the preferred

conversion method. The options are: Auto (automatic detection of aspect

ratio), 4:3 Panscan (Displays 16:9 widescreen broadcasts full screen on your

4:3 TV), 4:3 letterbox (black bars on top and under the picture on a 4:3 TV) and

16:9 (use this setting for 16:9 TV sets).

Video Out: Use this option to select which video quality you like to have on the TV SCART

output. Select CVBS or RGB for best quality. If you using a HDMI cable then

select CVBS. This selection allow you to select behind Video Resolution also the

high resolutions up to 1080p.

RF System: When using the TO TV connector on the rear panel (the built-in RF

modulator), you can select here your TV set’s analogue reception system.

Default is PAL-BG.

RF Channel: Set the RF channel of the modulator. Default is channel 38.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8113 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info