Bedienungsanleitung Strong SRT 8114 (Seite 7 von 28) (Englisch)

750855

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

1.0 INTRODUCTION

1.1 Safety Instructions

DO NOT INSTALL YOUR RECEIVER:

In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface

which might obstruct the ventilation slots.

DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:

To direct sunlight or any other equipment that generates heat; to rain or intense moisture; to

intense vibration and to any shock which may cause permanent damage to your receiver or to

any magnetic objects, such as loudspeakers, transformers, etc.

Do not use a damaged power cord. It may cause a fire or an electric shock. Do not touch a

power cord with wet hands. It may cause an electric shock.

When the receiver is not used for a long period of time, you should unplug the power cord

from the wall socket.

Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you may clean

your receiver with a soft lint-free cloth slightly made damp with a mild soap solution, and only

after disconnecting from the mains voltage supply. Make sure no foreign objects fall through

the ventilation slots because this could cause fire or an electric shock.

Do not place any objects on top of the receiver because this might prevent proper cooling of

the components inside.

Safety Precautions

Never try to open the receiver. It is dangerous to touch the inside of the receiver due to high

voltages and possible electrical hazards. Opening the receiver will void the warranty of the

product. Refer all maintenance or servicing to suitably qualified personnel.

When you are connecting cables, be sure that the receiver is disconnected from the mains

supply voltage. Wait a few seconds after switching off the receiver before you move the

receiver or disconnect any equipment.

It is a necessity that you only use an approved extension and compatible wiring that is suitable

for the electrical power consumption of the installed equipment. Please ensure that the

electrical power supply corresponds with the voltage on the electrical identification plate at the

back of the receiver.

If the receiver does not operate normally even after strictly following the instructions in the user

manual it is recommended to consult your dealer or the appropriate service for your country.

1.2 Storage

Your receiver and its accessories are stored and delivered in a packaging designed to protect against

electric shocks and moisture. When unpacking it, make sure that all the parts are included and keep

the packaging away from children. When transporting the receiver from one place to another or

if you are returning it under warranty conditions, make sure to repack the receiver in its original

packaging with its accessories. Failing to comply with such packaging procedures could damage the

product and void your warranty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8114 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 8114

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info