Bedienungsanleitung Strong SRT 8114 (Seite 20 von 28) (Englisch)

750855

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

+12:00", increasing by half hours progressively. The cities matching the set

GMT Offset are displayed at the bottom of the screen.

Daylight Saving: Select Off or On to add one hour extra for summer time during the summer.

Date: Date and Time settings are available only when GMT Usage is set to Off. Use

the 0~9 buttons to enter the date. Press EXIT to proceed.

Time: Date and Time settings are available only when GMT Usage is set to Off. Use

the 0~9 buttons to enter the time. Press EXIT to proceed.

Time Display Select On to display time on screen, Off to remove.

7.3.4 Timer Setting

This menu allows you to set up to 8 timed events for recording or waking up the receiver.

Use pq to select Timer Setting from the System Setup menu and press OK to enter.

The receiver will display a list with 8 timers, followed by their respective status. Select the timer you

wish to set or change with pq and press OK to proceed.

The timer setup menu will now be displayed.

The following settings are available:

Timer Mode: Choose between Off (Timer inactive), Once, Daily (Timer will be executed

every day, same time) or Weekly (Timer will be executed every week, same

day, same time) and Monthly (Timer will be executed every month, same day,

same time).

Timer Service: Choose between Channel (Timer will wake up the receiver) or Record (Timer

will start to record the scheduled event).

Wakeup Channel: Use tu to select the channel the timer will wake up with.

Wakeup Date: Use the 0~9 buttons to input the date for the timed event.

Wakeup Time: Use the 0~9 buttons to input the start time.

Duration: Use the 0~9 buttons to input the timer duration.

When all settings are according to your wishes, use pq to move the highlight to Save and press OK

to confirm. To quit the timer without saving your settings, move the highlight to Cancel.

7.3.5 Parental Lock

This menu allows you to protect the installation menu and/or channels with a PIN code. You can also

enter a new PIN code in the Parental Lock menu.

Use pq to select Parental Lock from the System Setup menu and press OK to proceed. You will be

asked to enter your PIN code. (DEFAULT PIN: 1234)

Menu Lock: Locks the installation menu. You can set Menu Lock to On or Off.

Parental Rating: Choose between: Off, 4 years and up to 18 years. Channels with a parental

rating above the chosen age will be protected with a PIN code (if available in

your local broadcast.)

New Password: Enter your new PIN code (4 digits) here.

Confirm Password: Re-enter your PIN code here to confirm.

7.3.6 OSD Setting

This menu allows you to change settings for: OSD Timeout and OSD Transparency.

OSD Timeout: Sets the time after which on screen banners and messages disappear. The

range is 1~10 seconds or Always On.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8114 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 8114

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info