626503
12
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
3.6 Connecting to an analogue Audio Amplier
Fig. 7
Use a good quality cable with 3.5 mm jack to connect your receiver to the analogue input of your
Hi-Fi audio amplifier for achieving best possible analogue audio quality.
3.7 Connecting a USB storage device
Fig. 8
Connecting a USB device to the unit allows you to playback multimedia files. See chapter 7.5. Media
Player.
NOTE It is recommended to use USB 2.0 storage devices or higher for recording
and play back of TV programmes or HD movies.
NOTE Timeshift/recording and playback only works properly when a fast
USB storage device such as a USB2.0 HDD is connected to the receiver.
Timeshift/recording and playback of HD content requires a sufficient read/
write speed of the used USB storage device.
4.0 STARTING UP FOR THE FIRST TIME
When you use your receiver for the first time, please select your menu language using pq and press
OK to confirm selection.
You will follow to the “Welcome” menu. Use pq to move the highlight to the setting you wish to
alter and use tu to change values. Highlight OK and confirm all selections.
Region: Select your region where this receiver is used.
Subtitle: Select Normal to display subtitles per default, Select Hard of Hearing to show
HoH subtitles per default. Select Off to hide subtitles per default.*
Aspect Mode: Use this option to select the aspect ratio of your TV and the preferred
conversion method. The options are: Auto (automatic detection of aspect
ratio), 4:3 PS (Displays 16:9 widescreen broadcasts full screen on your 4:3 TV),
4:3 LB (black bars on top and under the picture on a 4:3 TV) and 16:9 (use this
setting for 16:9 TV sets).
Scan mode: Select All to store scrambled and free to air channels or select Free to store
only free to air channels.**
Connection: Use this option to adjust the established connection to your TV set. Select
HDMI or TV SCART.
NOTE The wrong region selection can lead to missing channels or the channels
can be stored with wrong positions in the channel list.
*Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via
Teletext if available.
**Encrypted channels cannot be viewed with this receiver.
8
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Strong SRT 8202 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Strong SRT 8202

Strong SRT 8202 Bedienungsanleitung - Französisch - 28 seiten

Strong SRT 8202 Bedienungsanleitung - Polnisch - 32 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info