Bedienungsanleitung Strong SRT 8221 (Seite 23 von 31) (Englisch)

751655

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Other options

At the bottom of the screen there are some commands (color buttons) to make changes to satellites

or transponders (use INFO button to choose between Satellite and Transponder

Add Press RED button to add a new Satellite/Transponder.

Edit Press GREEN button to modify the value of the Satellite/Transponder.

Delete Press YELLOW button to delete one Satellite/Transponder.

Scan Press BLUE button to start the scan.

7.3.2 Terrestrial Channel Search

To access the terrestrial channel search press MENU and use t u to select Channel Search. Then use

pq to select Terrestrial Channel Search and press OK. To access this menu it is necessary to insert the

PIN code set during the first installation.

Auto Search This menu allows you to search for channels from all available frequencies

for your selected region automatically. Be aware that all previous installed

channels and favourite list(s) will be deleted. The new-found channels will be

installed in the channel list and afterwards you can create a new favourite list

if you like. Press OK to access the menu, with t u select Yes to start the scan

or No to back in view mode without scan.

Manual Search Select a particular channel to do a search on just one (known) frequency.

Press OK to access the sub-menu and use t u to select the channel to be

scanned, then press OK to start the scan. The signal quality bar might be

useful to check if the frequency is indeed in use.

Country Select the correct country where this receiver is used. If failing to do so, may

result in that channels appear randomly in the channel list, instead of a more

logical order.

Antenna Power Set to On if you use an active antenna. When set to On, 5 V will be present at

the RF in connector of the receiver. Select Off for passive antennas.

7.4 Time

Set up your time zone for clock/time in your menu and system.

Time Offset The GMT time can automatically be determined from the incoming TV

broadcast if set to Auto. The time zone is determined from the Country

setting in the Channel Search menu. If set to Manual, you can change the

Time zone yourself in the Time Zone option. Default is Auto.

Time Zone If the correct time cannot be obtained from the incoming TV broadcast,

change the Time Zone setting yourself.

Example: in case of Daylight Saving Time.

Sleep As a power saving feature, the unit will switch to Standby automatically, if no

command from the remote control is received for the set time. Options are 1

Hour up to 12 Hour and Off. Default is 3 hours.

Power On/Off You can set a time to automatically switch On and/or Off the unit every day.

The unit will start on the last watched channel.

Note: Set Auto Standby function to Off.

Power On Set to Enable if you want to use the automatically switch On function.

Power On Time Enter the switch On time with the numeric buttons on the remote control.

Power Off Set to Enable if you want to use the automatically switch Off function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8221 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 8221

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info