Bedienungsanleitung Strong SRT 8222 (Seite 19 von 26) (Englisch)

751658

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

installed in the channel list and afterwards you can create a new favourite list

if you like. Press OK to start the scan.

Manual Search Select a particular channel to do a search on just one (known) frequency.

Press OK to start the scan. The signal quality bar might be useful to

check if the frequency is indeed in use.

Country Select the correct country where this receiver is used. If failing to do so, may

result in that channels appear randomly in the channel list, instead of a more

logical order.

Antenna Power Set to On if you use an active antenna. When set to On, 5 V will be present at

the RF in connector of the receiver. Select Off for passive antennas.

Scan Mode Select between FTA (Free-To-Air), which will only install Free-to-Air channels

or All, which will install all found channels, even if they are scrambled. Then

select Auto Search or Manual Search and press OK to start scanning.

7.6 Time

Set up your time zone for clock/time in your menu and system.

Time Offset The GMT time can automatically be determined from the incoming TV

broadcast if set to Auto. The time zone is determined from the Country

setting in the Channel Search menu. If set to Manual, you can change the

Time zone yourself in the Time Zone option. Default is Auto.

Time Zone If the correct time cannot be obtained from the incoming TV broadcast,

change the Time Zone setting yourself.

Example: in case of Daylight Saving Time.

Auto Standby As a power saving feature, the unit will switch to Standby automatically, if no

command from the remote control is received for the set time. Options are 1

Hour, 2 Hour, 3 Hour, Off. Default is 3 hours.

Power On/Off You can set a time to automatically switch On and/or Off the unit every day.

The unit will start on the last watched channel.

Note: Set Auto Standby function to Off.

Power On Set to Enable if you want to use the automatically switch On function.

Power On Time Enter the switch On time with the numeric buttons on the remote control.

Power Off Set to Enable if you want to use the automatically switch Off function.

Power Off Time Enter the switch Off time with the numeric buttons on the remote control.

7.7 Option

Set up the options for languages.

OSD Language Use t u to select the language for the On-Screen Display.

Subtitle Language Set your preference for the subtitle language priority, if available in broadcast.

Audio Language Set your preference for the audio language priority, if available in broadcast.

Digital Audio Options are: Off, PCM, RAW HDMI On, RAW HDMI Off

PCM: All audio will be down mixed to a Stereo format on HDMI and S/PDIF

outputs.

RAW HDMI On: Raw audio information will be passed on to the HDMI

output, without down mixing to PCM Stereo, to be passed on to and

processed by a digital amplifier or home-theatre set to produce multi-

channel audio.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8222 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 8222

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info