480564
21
Zoom out
Zoom in
Vorherige Seite
1/23
Nächste Seite
PART 1 • English
20
6.4.2 Play
Press u (PLAY) button in TV mode and the Recording File List will appear on screen.
Select with the pq buttons the file you want to watch and start playback by pressing OK.
You can activate Fast Forward or Fast Rewind during playback by pressing the or button. Another
pressing of these buttons will change the speed (FF: x2, x4, x8; FR: x1, x2, x4, x8). Press u (PLAY) button
to continue playback at desired position.
To choose a specific position or scene in the playback press INFO and select the desired position with
the tu buttons.
To stop the playback press (STOP) button.
6.4.3 Timeshift:
Make sure that in PDR menu the Timeshift function is set to ON. This can be adjusted in Application” >
“PDR” menu.
Press II (PAUSE) button in TV mode to start Timeshift. The Recording Info banner appears and shows
the recorded time.
To continue watching the programme press u (PLAY) button.
If you start Timeshift during recording the receiver keeps recording.
You can activate Fast Forward or Fast Rewind during Timeshift by pressing the or buttons. Another
pressing of these buttons will change the speed (FF: x2, x4, x8; FR: x1, x2, x4, x8).
To choose a specific position or scene in Timeshift mode press INFO and choose the desired position
with the tu buttons.
To leave TimeShift press (STOP) button.
A.1 TROUBLESHOOTING
There may be various reasons for the abnormal operation of the receiver. Check the receiver according to
the procedures shown below. If the receiver does not work properly after checking it, please contact the
dealer. Don’t open the receiver cover. This may cause a dangerous situation and will void the warranty.
Symptom Cause Remedy
The 4 digits display on
front panel does not
light up.
The power cord is not plugged
in.
Check that the power cord is plugged
in to the wall outlet. Make sure power
switch on rear panel is in ON position.
No picture or sound Wrong connection of the Audio/
Video output of the receiver
to TV.
Audio muting.
TV power off.
Connect the Audio/Video output of the
receiver to TV correctly.
Press the MUTE button
Turn TV on.
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Strong SRT 8300 CI wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info