Bedienungsanleitung Strong srt 8345 (Seite 13 von 31) (Englisch)

424993

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

PART 1 • English

4.1 Language Selection

Press OK to choose the language.

4.2 Select Satellite

The Installation Wizard preconﬁgured for easy installation of Astra 1C, 1E (19E) or HOT BIRD (13E).

For these satellites LNB conﬁguration is predeﬁned as Universal LNB connected to the receiver via

DiSEqC 1.0 switch input 1. If your dish is aimed to Astra 1C, 1E (19E) or HOT BIRD (13E) then select

corresponded satellite from the list (future steps of installation are described in 4.3). If your dish is aimed

to another satellite or you have multiple dish installation then select other (future steps of installation are

described in 4.4).

4.3 Dish adjustment

After selection of Astra1C,1E(19E) or HOT BIRD (13E) menu WIZARD-DISH ADJUSTMENT will appear.

Adjust your dish position in small steps until the signal strength and quality bars turn green or yellow.

Try to reach the maximum possible strength and quality level. Once you are sure the signal cannot be

improved, ﬁx the dish on this position and press OK on your remote control to start the channel search.

After ﬁnished search, the ﬁrst programmed channel will be displayed on screen.

TIP: Depending from OSD language and satellite selected you may be prompted to select

preinstalled channel list. These channel lists include most popular channels ordered

according to the preference of most of the customers

4.4 Channel set-up

If you select Other satellite then menu Channel set-up will be displayed on screen. Using pq buttons

select the Satellite item and press OK to display list of satellites. Use pq buttons to select satellite of

your choice and press OK. Using pq buttons select Dish number item and using tu buttons select

dish number and transponder, network search and channels which you want among All channels, FTA and

Scrambled in search for menu. Press OK in Dish number mode to set up Dish menu.

In Dish setup menu conﬁgure settings of the LNB, DiSEqC switch and Antenna mode. Please refer to

chapter 5.2.2 Dish set-up for detailed information. If you use ﬁxed dish, then press RED (Auto scan)

button on remote control to start channel search. If you use dish mounted on DiSEqC 1.2 or GOTO X

positioner then select Dish position item and press OK. If you use GOTO X positioner then GOTO X

setup menu will be displayed. Please refer to GOTO X setup description in chapter 5.2.4. After setting up

dish position, press RED (Auto scan) button on remote control to start channel search.

4.5 Digital Terrestrial TV installation

After Satellite scan is completed you will be asked to continue installation with Digital Terrestrial TV. If

you do not want to install Digital Terrestrial TV at this time – select No and press OK. You can setup

Digital Terrestrial TV later through “Terrestrial search” menu. If you wish to install Digital Terrestrial TV

– select Yes and press OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong srt 8345 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong srt 8345

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info