Bedienungsanleitung Strong SRT 8525 (Seite 13 von 27) (Englisch)

480560

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

PART 2 • English

5.7 Using external USB storage devices

We strongly recommend you to carefully read and follow the speciﬁed points mentioned in chapter

1.5 Usage of external USB devices!

Further please consider these points when you use your receiver with an external USB storage

device:

 Before you disconnect the USB device from the receiver, we recommend using the

Remove the USB device function which is available in several menus of your receiver. If you

have removed the USB device unintentionally, then please reconnect it to be detected

again.

 Well functioning multimedia playback is highly depending on the data rate supported

by the connected USB device. Especially for playback of video ﬁles and loading high

resolution pictures, a reading speed of min. 10 - 15 MB/sec is required. As high data rates

are not supported by all types of USB devices it is necessary to ensure that the used

USB device can fulﬁl this requirement. Mostly such data can be found on the website or

speciﬁcation sheet of the USB device manufacturer.

6.0 MAIN MENU

The main menu gives you access to speciﬁc settings and multimedia functions. To access the main

menu, press MENU in viewing mode. The main menu consists of the following sub menus: Program

Organizer, Channel Search, System Setup, Tools and Multimedia.

Press EXIT in the main menu to get back to the previous menu.

6.1 Programme Organizer

Press MENU and use t/u to select the Program Organizer and press OK.

Following submenus are displayed: Channel Manager, Channel Sort and Delete all.

Use p/q to select a submenu and press OK or u to access.

6.1.1 Channel Manager

The channel manager allows you to move, skip, lock, delete and add channels to the favourite list.

To access this menu you will need to enter your PIN code DEFAULT PIN: 0000.

Now your TV channel list will be shown. To switch between the TV and radio list use t/u. To

navigate within the list, use the p/q buttons.

Move To move a channel to a new position, use the p/q buttons to

select the channel, then press the RED button. Now next to the

channel’s name the symbol

is shown. This indicates that this

channel can be moved to another position. To do so, use the

p/q buttons to move it and press OK to conﬁrm. Proceed as

described for any other channels you wish to move. You can also

correct the channel selection for moving by pressing the RED

button again.

Skip To skip a channel during switching through the channel list, use

the p/q buttons to select the channel, then press the GREEN

button. Now next to the channel’s name the symbol is shown.

After that, channels marked with will be ignored when

switching through the channels in viewing mode. Proceed as

described for any other channels you wish to skip. You can also

correct the channel selection by pressing the GREEN button

again. Channels marked for skipping will stay accessible within

the channel list.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8525 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info