Bedienungsanleitung Strong SRT 8550 (Seite 15 von 28) (Englisch)

751661

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

English

7.1 Subtitles

Some channels support a choice of subtitle languages. Press SUB in viewing mode to display a list of

available subtitle languages. Select your subtitle of choice with pq and press OK to conrm. Press  to

leave without making changes.*

*Availability of DVB/Hard of Hearing subtitles depends on the broadcast. If subtitles are not available, they can be activated via Videotext

(if available).

1.26 EPG (Electronic Programme Guide)

The Electronic Programme Guide is a very useful function that allows you to view event schedules and

programme information and to mark events/movies for wakeup of the receiver or schedule an event

recording. To access the EPG, press EPG in viewing mode. Use pq to select a channel and tu to

select an event. Press OK to display detailed information of the selected event. Use 9 to quit the detailed

information screen. Press the RED or GREEN buttons to see and select another day. Press the YELLOW

button to set a timer for a selected event. Refer to section 7.3.4 for details of the timer function.

NOTE: Availability of EPG data depends on broadcast.

1.27 Record and Timeshift

To use these functions you must connect a USB memory device to the USB port at the rear panel. For

best performance, especially of HD content, we advice to use Hard Disk Drives USB 2.0 or higher. These

must be formatted in FAT32 or NTFS format otherwise Recording and Timeshift function will not work.

Recording of encrypted programmes may require additional authorization by broadcaster.

1.27.1 Recording

To immediately record a programme, press 4 to start the recording and press 3 to quit. During a

recording it is possible to press pq, or OK and pq to change to another channel on the same

transponder only. Also it is possible to use the 09 buttons.

1.27.2 Timeshift

If you want to use the Timeshift function you only need to press 2 in viewing mode. To resume

timeshifted content, press u or 2 again. During the playback you can use the 5 6 or 2 buttons. To stop

the Timeshift mode, press 3 and it will jump to the actual time of the live signal. The function will still be

running in the background and as long you do not switch to another channel it is possible to jump again

to the beginning by pressing 2 again. Also, with tu it is possible to jump in time during Timeshift

modes. Default is set to 20 seconds. Press the GREEN Jump Set button to change the jump time.

If the channel is changed the timeshifted content will only be accessible from the newly selected

channel.

NOTE: To switch o the Timeshift function completely you need to change the

Timeshift status to disable in the Record setup menu.

1.27.3 Timer recording

There are 2 ways to set a timer:

Programming a record timer via the EPG

The easiest way to record an event is via the EPG. Press the EPG button to open the EPG, then use pq

to select a channel. After that, press tu and use pq to select an event. You can book a record timer

by pressing 4. If you press 4 again on this event, the timer will be disabled. The set time of timer is xed

and cannot be modied.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8550 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info