PART 1
•
English
13
6. Now slowly move your dish to the left or to the right , make small steps to allow
the (green) signal bars to display the signal level. Note that you will not see any
green bars until you have aimed your dish to the ASTRA satellite correctly.. If you
can not find the signal by turning Left or Right, then increase or decrease the
vertical angle of you dish and again turn Left and Right. Repeat these steps until
you see the Green signal bars appearing.
7. Once you see the bars, try to optimize the Level and Quality bars my making
very small movements with the dish in Left, Right, Upper or Lower direction.
Once you are convinced that you have the optimal signal strength, firmly fix you
dish on that position.
8. Now you are ready to search the satellite and scan the available channels, you
have different options to scan, we recommend you to the keep the settings in the
menu as they are. Just press the RED (Automatic) button on your remote control
to start the automatic scan. All channels will be found automatically, and once the
search is completed the found channels will be stored in a logical order.
9. Once this process is finished the receiver will automatically switch to channel
number 1. If channel number 1 is a Free To Air channel ( not encrypted) you will
be able to enjoy the first digital pictures.
10. If channel number 1 is encrypted you will see the ”Please Insert SmartCard” message
on your screen. Insert your smartcard in the SmartCard reader in the front-panel
of the receiver, note that the card is inserted as shown in the picture below:
