Software Upgrade: You can download the latest software available including new
technologies to your receiver. To upgrade your system, apply the following steps:
1. Select “Software Upgrade” and press OK. Enter your PIN code.
2. Press the Green button to scan the satellite for availability of a newer
software version. If there is a recent software version available for your
receiver, it will be detected.
3. Press the Red button to start the upgrade.
4. Press the BACK button until you go back to main menu.
Note:
Be sure that your receiver is connected to the satellite signal. Do not turn off your
receiver while you are downloading new software.
System Info: The system information displays information about your receiver
such as model number, software and boot version. To check system
information, apply the following steps:
1. Select “System information” and press OK. Press Back to return to the menu
Mediaguard: Here you will find information about the
embedded Mediaguard decoder.
1. Select “Mediaguard” and press OK.
Press Back to return to the menu
Factory Reset: Be careful when using this function, because it will erase all
the data and parameters you may have set earlier to your receiver. Once you
have made a Factory Reset you will have to re-install your preferences and
re-scan your channels. To reset your receiver to factory default, apply
the following steps:
1. Select “Factory Reset” and press OK.
2. Enter your PIN Code. The receiver will reset itself to the original factory settings.
Note:
Your PIN code will change back to the factory setting “0000”.
PART 1
•
English
24
