PART 1
•
English
23
5.1.3 The Timer Menu
The timer can automatically switch on or off your receiver at any time. This enables you
for example to record programs with your VCR while you are not at home. It also can be
used to wake you up at the time you set it. Please apply the following steps:
1. Press the Menu button.
2. Using UP/DOWN keys on your remote, select “Timer Menu” and press OK.
Timer number: You can select up to 8 different events.
Timer State: Set to “Enabled” to use the timer function, or "Disable” to
stop the timer functions of the timer number you selected.
Action: You can select the following functions in the action mode:
1. “Power On”: The receiver powers on at the designated date and time.
2. “Power Off”: The receiver powers off at the designated date and time.
3. “Time interval”: The receiver switches on at the designated date
and time, displays the channel and then switches off at the
designated date and time (The value set at the ending time).
Repetition: You can set the cycle of the action designated in the timer
mode (one time, Every Day or Every Week).
Date: You can set the starting date of the timer action. Enter the new
date with the [0-9] keys.
Hour: You can set the starting time of the timer action. Enter the new
time with [0-9] keys.
End Time: You can set the ending time of the channel view when the
Action mode is on Time Interval. Enter the new time with [0-9] keys.
Channel: You can select the channel to be shown when the receiver timer
mode Powers ON. Press OK key, now the channel list will appear. Select
the channel of your choice and confirm with OK key.
3. Press the Red button to save and proceed with another timer event.
