RF Channel: Press OK or the Right button and set the UHF
channel number to the same UHF channel number of your TV
set. This only has to be done if your TV set is connected with a
coaxial (RF) Cable. If the UHF Channel numbers of the receiver
and the TV set are not set the same, no picture will be displayed.
2.Press BACK until you go back to main menu.
Menu Settings: You can set the OSD (On Screen Display) to your personal
preferences. You can change the OSD settings by applying the following steps:
1. Select “Menu Settings” and press OK or the Right button.
Color Scheme: Press OK or the Right button and set the colours
of the OSD menu to “Standard”, “Color 1” or “Color 2”.
Transparency: Press OK or the Right button and select how trans-
parent you want your OSD.
Brightness: Press OK or the Right button and select how you
want the OSD to be.
Duration: Press OK or the Right button and select how long you
want the information banner to be on the screen when starting
up your receiver or when changing channels.
2. Press BACK until you go back to main menu.
Time setting: The system uses GMT (Greenwich Mean Time) as a default. To
set the time, apply the following steps:
1. Select “Time Settings” and press OK or the Right button.
Select Time Zone: Press OK or the Right button, and a list of the
GMT plus or minus the hours you need for your country is dis-
played. Using UP/DOWN keys select the correct one, and the
receiver will automatically show the current time in your country.
To set the time manually:
Select GMT usage: Press OK or the Right button and use
the UP/DOWN buttons to set the GMT usage to “off”.
Press OK to save your setting. The time setting menu will
now activate the bottom two fields of the menu.
PART 1
•
English
26
