PART 1
•
English
31
LNB: Select “LNB” and press OK or the Right button. In the “LNB field”,
select one of the available LNB's. If you want to set LNB related values,
press OK and the LNB Set-up menu (Described in LNB Set-up) will be
displayed.
Dish Position: Select “Dish position” and press OK or the Right button. It
displays the dish position of the current satellite. When you use a
DiSEqC 1.2 positioner, you can select dish position in this field. To set a
dish position, the status must be “On” (in case the position has already
been set) or “Off” (in case the position has not been set).
Note:
If in the “LNB Set-up” menu described in section 5.1.4.2, the “LNB Dish” item is
set to “fixed” you will not be able to change the dish position settings in the
channel set up menu. Only when you have selected the “LNB Dish” to “moved”,
you will be able to change the settings in the channel set up menu.
Press OK button to set dish position. The “Positioner Set-up” menu will be
displayed. (Detailed description is in Positioner Set-up section 5.1.4.3.1)
Frequency, Polarization, Symbol Rate: Shows the transponder (TP) values
of the current satellite. To change the value apply the following steps:
1. Select ”Frequency” and press OK. The list of TP values of the
current satellite is displayed.
2. The functions of the colored buttons now represent other
functions. <Screen 6>.
3. To edit a TP value, press the Red (Edit) button
4. To Add a TP manually, press the Green (Add) button
5. Press the Blue (Delete) button to delete the current TP value.
(Save is only available in the Edit mode or the Add mode.)
6. Press the Yellow (Save) button to save the settings.
