PART 1 • English
4
1.3 Safety Precautions
To maintain your receiver’s optimum performance, you are advised to apply the following safety
precautions:
n Read this manual carefully and make sure you fully understand the instructions given.
n Refer all maintenance or servicing to suitably qualified personnel
n If you wish, you may clean your receiver with a soft lint-free cloth slightly made damp with a mild
soap solution, only after disconnecting from the mains voltage supply.
n Do not use alcohol or ammonia based liquids to clean the receiver.
n Do not open the receiver cover, as you will be exposed to a shock hazard
n Do not open the receiver cover this will void your warranty.
n Do not place any objects on top of the receiver because this might prevent proper cooling of the
components inside.
n Make sure no foreign objects fall through the ventilation slots because this could cause fire or an
electric shock.
n Wait a few seconds after switching off the receiver before you move the receiver or disconnect
any equipment;
n Please ensure that that the electrical power supply corresponds with the voltage on the electrical
identification plate at the BACK of the receiver.
n It is a necessity that you only use an approved extension and compatible wiring that is suitable
for the electrical power consumption of the installed equipment.
n If the receiver does not operate normally even after strictly following the instructions in this user
manual, it is recommended to consult your dealer.
1.4 Storage
Your receiver and its accessories are stored and delivered in a well protective packaging against electric
shocks and moisture. When unpacking it, make sure that all the parts are included and keep packaging
away from children. When transporting the receiver from one place to another or if you are returning it
under warranty make sure to store the receiver in its original packaging with its accessories. Failing to
comply with such packaging procedures could void your warranty.
1.5 Equipment Set-up
We recommend you to consult a professional installer to set up your equipment. Otherwise, please
follow the following instructions:
n Refer to the user manual of your TV and dish.
n Make sure that the 220 Volts cable is in a good condition.
n Make sure that the outdoor components of the dish are in good condition.
n Make sure that the LNB in the dish is connected with the correct I.F. coaxial cable (75 Ohm) and
that the connectors are mounted correctly.