Bedienungsanleitung Strong SRT7840 (Seite 12 von 28) (Englisch)

750861

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

English

3.3 Basic connection using an HDMI cable

Fig. 9

1. Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good

quality coaxial cable and suitable ‘F-connector’ plugs.

2. Connect one end of a good quality HDMI cable to the HDMI output on your receiver and the

other end to the HDMI input of your TV.

3. Plug the power adapter to a suitable wall outlet.

3.4 Basic connection using a SCART cable

Fig. 9

1. Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good

quality coax cable and suitable ‘F-connector’ plugs.

2. Connect one end of a good quality Scart cable to the TV SCART connector on your receiver and

the other end to the SCART input of your TV.

3. Plug the power adapter to a suitable wall outlet.

3.5 Connecting to the Internet

The receiver connects to the Internet through the Internet router or DSL/cable modem in your home network.

It connects to the home network over its Ethernet port or Wi-Fi.

Fig. 10

Connect one end of the Ethernet cable to the receiver and the other end to the LAN port at the router or DSL/

cable modem. To connect the receiver through Wi-Fi, set it during the First Time Installation or select Network

then WiFi Network in the main menu.

3.6 Connection to main power supply

Fig. 10

After all the connections are done you can connect your receiver to power using the supplied external AC/DC

adapter. Now plug the adapter into the wall socket.

4.0 STARTING UP FOR THE FIRST TIME

Once you properly installed and connected all cables of the receiver, setup your receiver step by step by First

Time Installation procedure.

It will guide you through the basic installation and channel searching process.

4.1 Language, audio and video

The receiver turns on displaying the Welcome message, press OK to go to the next step. In this page it is

possible to set Language, Resolution, Aspect Ratio and Audio Format. Press OK to select the option you need to

change then p q to change selection. To confirm and exit press OK.

4.2 PIN code creation

Create and confirm the PIN code, then select AVANTI and confirm with OK to continue.

4.3 Internet Connection

If the Ethernet cable has already been connected, the receiver will display Connesso on Connessione Ethernet, if

not the receiver will display Collega il cavo. In this case connect the Ethernet cable to the Ethernet port and the

receiver will detect the connection automatically.

If you intend to connect the receiver via Wi-Fi connection, select Elenco reti and the receiver will display a list of

all available networks. Select your network by pressing OK and insert the password.

To go to the next step, select Avanti and confirm with OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT7840 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT7840

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info