Bedienungsanleitung Strong SRT8209 (Seite 20 von 25) (Englisch)

750860

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

Restore Factory Default Reset your receiver to the default factory settings. Sometimes useful if the

unit suddenly behaves in an unexpected manner, e.g. after a power failure.

Select System then Restore Factory Default in the main menu and press OK to

select. Enter your password or the DEFAULT password: 1234 and press OK

to confirm. Note: This option will delete all your channels, Favourite lists and

settings. The receiver will reboot and start with the initial Installation menu.

Information This submenu shows receiver specific information such as hardware and

software version. Please have the Information screen on hand when you call

our hotline. The person who answers your call might ask for the information

given in this screen.

Software Update This feature allows you to update the receiver software via the USB port.

When a new software is available for your receiver, it can be downloaded

from our website. Place the software file (unzipped) in the root directory of

your USB storage device (HDD, memory stick etc.) and connect the device to

the USB port of the receiver. First a message box will appear that a USB device

is found. Then go to the System menu and select the Software Update option.

Select the correct file in the list. Press OK to start update. When ready, the unit

will reboot automatically.

Recall List If set to On, a list of last watched channels will be displayed in viewing mode,

when the RECALL button on the remote control is pressed. Choose the

channel to go back to and press OK. If set to Off, the RECALL button will

instantly return to the previous watched channel.

Network Setting Setup your Network connection to use the Network Apps.

Link Type is LAN, for use with a wired network to a router/modem on the RJ45

Ethernet port.

IP Setting Press OK to open the submenu.

DHCP If DHCP is set to On, the unit will auto-negotiate with the router/

modem for the correct IP settings, assuming the router/modem also being

set to DHCP On. This is the common default. If you like to use different IP

settings, switch DHCP to Off and to Edit, press GREEN and enter the required

numbers. However, some technical knowledge about TCP/IP protocols is

required.

MAC Address Information about the unit's unique identification to the LAN port.

Status Information about the current status of your Ethernet connection.

7.9 USB

Multimedia

This function allows playback of different kind of files from the connected USB storage device.

Select Music and press OK to playback MP3 files from your folders. Select Photo and press OK to view

your favourite pictures in JPG format. Select Movie and press OK to enter to play a number of video

formats. Select PVR and press OK, and select the HBPVR folder to show the recordings you've made.

The unit supports USB HDD devices with FAT32 format. However, it is possible to use already on a PC

formatted NTFS HDD device. Make sure your USB device is formatted correctly. Use the On-Screen

button suggestions and the multimedia buttons like RECALL (Return), u, 3 and 2 on the remote

control to work inside the multi media player.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT8209 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT8209

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info