Bedienungsanleitung Stylies Orion (Seite 11 von 55) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Finnisch)

785947

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

- before the device is moved to another place

- before the device is opened or when it is reﬁlled with water

- in the case of malfunction

- before any cleaning

- after each use.

• Never use an extension cable that has been damaged.

• Never carry or pull the device by the power cable.

• Penetrating the housing with any kind of object is strictly prohibited.

• If the supply cord is damaged, it must be replaced by the manufacturer, an authorised representative

or a qualiﬁed person in order to avoid a hazard.

• Do not pull the power cable over sharp edges or allow it to become jammed.

• Never remove the plug from the socket by pulling at the power cable and never remove it with wet

hands.

• Do not use this humidiﬁer in close proximity to a bath tub, shower or swimming pool (always ensure

a minimum distance of 3m). Always place the device in a position where it cannot be reached by

anyone in the bath tub.

• Do not set up the device near a source of heat. Do not subject the power cable to direct heat (such

as heat from hot oven hobs, naked ﬂames, hot irons or heating furnaces). Keep the power cable away

from oil.

• Do not position the device directly next to walls, curtains or furniture.

• Ensure that the device is stable during operation and that no-one can trip over the power cable.

• The device is not splash-proof.

• Do not store or use the device outdoors.

• Store the device in a dry place, out of the reach of children (in its box).

• Always unplug the device when it is to be reﬁlled with water or cleaned.

• Do not add anything to the water (fragrances, essential oils or water fresheners).

Do not place the device directly on the ﬂoor. Use a water-proof underlay!

FIRST USE / OPERATION

1. Please note: Never transport the device when it is ﬁlled with water and when upper part (2) is

attached. Otherwise water may splash into the upper part and stop the electronics from work-

ing correctly.

2. For this reason, base (4) of the Stylies Orion humidiﬁer should initially be ﬁlled with water and

placed in a suitable location separately. Alternatively, the device can initially be positioned and

then ﬁlled through water ﬁlling opening (9). Insert ﬁlter cassettes (10) into the “drawers”.

3. When this base is in the desired position, place upper housing (2) back on the base. Plug power

cable (1) into the household power socket. Check that the housing is fastened securely, as a

safety contact prevents operation if the device is open.

4. Switch on the Stylies Orion using on / oﬀ switch (6). The desired power setting can be selected

using power setting button 1 or 2 (7).

5. The desired air humidity can be selected using hygrostat button (8), from 1 LED (low humidity)

to 5 LEDs (high humidity). For example, if only 1 LED is lit, the device switches itself oﬀ at a

relative humidity of approx. 35%, and only starts operating again when the humidity falls below

the 35% mark. We recommend a medium setting (in the comfort zone) for an optimal air hu-

midity of around 40-60%.

Caution: the device will not switch on if the hygrostat has been set too low.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stylies Orion Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info