501843
58
Zoom out
Zoom in
Vorherige Seite
1/81
Nächste Seite
SummaSign Pro SL D-series Cutters User’s Manual
Operation 2-16
2.4.13 MEDIA SENSOR
The MEDIA SENSOR submenu is used to activate or deactivate the media
sensors. The sensors detect the presence and absence of media to prevent
damage to the cutting strip and knife tip.
The active setting is marked with an asterisk (¾) on the LCD.
2.4.14 AUTOLOAD
The AUTOLOAD option allows the user to control how vinyl is pulled from the roll.
When AUTOLOAD is ON, the cutter will automatically unroll the vinyl as needed.
When AUTOLOAD is OFF, the user should manually unroll sufficient vinyl before
beginning to cut.
The default AUTOLOAD setting is ON. The best results and performance are
guaranteed when using this setting.
The active setting is marked with an asterisk (¾) on the LCD.
2.4.15 TOOL COMMAND
TOOL COMMAND is used to determine whether the DM/PL and HP-GL
pen/knife-select commands (the P and SP commands, respectively) are
ignored or accepted.
When the TOOL COMMAND option is set to “ACCEPT”, the P or SP commands
will change the selected tool in the cutter according to the suffix that follows
the pen/knife command. When a P2 command is sent, the cutter’s LCD will
prompt the user with the following message: “INSERT PEN”. When the TOOL
COMMAND option is set to “IGNORE”, the pen/knife commands are ignored.
The default setting is “ACCEPT”.
The active setting is marked with an asterisk (¾) on the LCD.
2.4.16 LOAD ON W CMD
The LOAD ON W CMD submenu will only be displayed if the PLOT LANGUAGE is
set to DM/PL (See Paragraph 2.4.4). When receiving the DM/PL Window-
command (W-command), LOAD ON W CMD determines whether media is
loaded apart from the scaling function. In addition to scaling, the W-command
is very useful when cutting long signs. Media loading will go more smoothly with
the W-command because sufficient media will be pulled from the roll at once.
Then, even when AUTOLOAD is off, there is no need to unroll the media
manually.
58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Summa SummaSign Pro SL T-series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info