118724
78
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
62 Netra t 1400/1405 Installation and User’s Guide September 1999
Diagnosing PSU Faults
If a PSU suffers an internal failure (that is, its output fails while input power is still
applied), the Fault LED will flash and the event will be recorded as described above.
For example, the message
LOM event: PSU 2 Output failed
may be displayed on the LOMlite console and
Sep 7 11:44:20 hostname lomlited: LOMlite PSU 1 Output failed
may be displayed on the Solaris console. Note that an event will be issued if the
Fault LED is not already on, indicating that the LED has been set to flash. If a PSU
output failure occurs, the PSU should be replaced.
If the PSU suffers an external failure (that is, one or more of its inputs fail), the Fault
LED will not flash as the fault is external to the system but the fault will still be
reported as, for example:
LOM event: PSU 2 InA failed
In the Netra t 1400 system, the LED corresponding to the failed supply (A or B) will
go off.
Once the fault has been corrected, you can clear the event log using the Solaris
lomctl clearevents command. This will automatically extinguish the Fault LED
if it is lit. You can also turn off the Fault LED using either the LOMlite console
command faultoff, or the Solaris utility lomctl faultoff.
To display the current status of the PSUs, use the LOMlite console environment
command or the Solaris utility lominfo psu.
Diagnosing Fan Faults
If the speed of a monitored fan drops below a pre-defined limit, the Fault LED will
flash and the event will be reported as described above. For example, the message
LOM event: Fan 3 failed
may be displayed on the LOMlite console, and
Sep 7 11:44:20 hostname lomlited: LOMlite: Fan 3 failed
may be displayed on the Solaris console. Note that an event will be issued if the
Fault LED is not already on, indicating that the LED has been set to flash. If a fan
failure occurs, the fan should be replaced.
LW3User.book Page 62 Wednesday, November 10, 1999 9:00 AM
78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sun Netra 1400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info