Bedienungsanleitung Sunbeam MX9200 Planetary Mixmaster (Seite 11 von 40) (Englisch)

654206

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Count-up timer

The count up timer informs you how long

your ingredients have been mixing for. The

next time you mix the same ingredients you

can then set the count-down timer for the

specific time.

As soon as you start mixing, the timer will

automatically start to count up.

The maximum mixing time is 20 minutes

and will be displayed on the LCD screen as

“20:00” (twenty minutes, zero seconds).

The mixer will automatically stop mixing after

20 minutes and beep twice.

The screen will flash for about 5 seconds.

The timer will automatically re-set to

“00:00”.

The LCD screen will display the speed

setting that it stopped at and this setting will

continue to flash.

If you pause the mixer at any time during the

mixing process by pressing the

button

at the front of the speed control dial, the

mixing time displayed on the LCD screen will

flash until you resume mixing by pressing the

button again.

To reset the timer to “00:00”, turn the speed

control dial anti-clockwise to the “0” location

or, when paused, press the ‘+’ and ‘-’ buttons

simultaneously.

Count-down timer

The count-down timer is especially useful

when following a recipe that specifies mixing

times.

The ‘+’ and ‘-’ buttons allow you to choose

the desired mixing duration. Press the

‘+’ button and you will add 30 seconds.

Press the ‘-’ button and you will reduce the

previously set mixing time by 30 seconds.

For example, if a recipe calls to “beat for

2 minutes”, you can set the count-down

timer to 2 minutes. Simply press the ‘+’

button until “02:00” is displayed on the LCD

screen, i.e. press the ‘+’ button four times.

If you would like to change the countdown

time after your initial setup, press the

button, then press the ‘+’ and ‘-’ buttons to

increase or reduce the mixing time to the

nearest 30 sec increment.

For example, you set the count-down timer

to 3 minutes and turn the speed control dial

to start mixing on a chosen speed. After 1

minute, 25 seconds, you pause the mixer by

pressing the

button. The LCD displays

the remaining count-down time of 01:35. If

you now press the ‘+’ button once to increase

the mixing time, the display will show 02:00

(which is the nearest 30 sec increment).

To reset the timer to “00:00”, turn the speed

control dial anti-clockwise to the “0” location

or, when paused, press the ‘+’ and ‘-’ buttons

simultaneously.

When the chosen mixing time is completed,

the mixer will beep twice to inform you that

the time has expired. It will stop mixing

automatically. The timer display “00:00”

and the LCD screen will flash for about 5

seconds. The LCD screen will display the

speed setting that it stopped at and this

setting will continue to flash.

Using your Café Series

Planetary Mixmaster

Bench Mixer

continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sunbeam MX9200 Planetary Mixmaster Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info