Bedienungsanleitung Sunbird Solar Solarpod Pro 1000 (Seite 4 von 4) (Englisch)

654687

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Section 6

________________________________________________________________________

CARE AND MAINTENANCE

• Dust regularly with a clean dry cloth to prevent dust and dirt from building up on the

vents and power inputs/outputs. Store in a clean, dry place when not in use.

• Charge after each use, every 30-60 days, and before storing so it is ready to use when

needed.

• Solarpod™ Pro 1000 is only serviceable by an authorized repair facility. Do not dismantle.

Warranty is void if the device is opened by unauthorized personnel. For technical

support, contact your local distributor or go to www.sunbird-

solar.com/technical_support for online technical support.

Section 7

________________________________________________________________________

TROUBLESHOOTING

If our Solarpod™ Pro 1000 fails to operate as specified, follow these troubleshooting steps to

correct the issue. If you still experience issues, please contact your local distributor or go to

www.sunbird-solar.com/technical_support for online technical support.

Charging Issues

• Ensure all cords are connected securely.

• Check power indicators on chargers and the Solarpod™ Pro 1000 to verify they are

operating.

• If using a solar panel to charge, ensure it is correctly positioned in direct sunlight.

• Check that the fuses on the Solarpod™ Pro 1000 have not blown.

12V DC Output Fails

• Check the battery indicator (blue LED strip) to see if the Solarpod™ Pro 1000 has

sufficient battery charge available. If not, follow the charging steps previously described.

• Check to make sure that the 12V DC circuit protection fuse is not blown by removing the

12A fuse housing cap. Inspect the fuse and replace if needed with the same size fuse.

• Check the 12V DC output socket for obstructions or other visible damage.

• Verify the device being charged is not damaged.

AC Output Fails

• Check the battery indicator (blue LED strip) to see if the Solarpod™ Pro 1000 has

sufficient battery charge available. If not, follow the charging steps previously described.

• Ensure the AC power button is on and the red light is on.

• Check to make sure that the AC circuit protection fuse is not blown by removing the 6A-

6.3A or 8A fuse housing cap and then removing the 6A-6.3A or 8A fuse. Inspect the fuse

and replace if needed with the same size fuse (See Section 8 for AC fuse reference chart).

• Check the AC output socket for obstructions or other visible damage.

• Verify the device being charged is not damaged.

USB Output Fails

• Check the battery indicator (blue LED strip) to see if the Solarpod™ Pro 1000 has

sufficient battery charge available. If not, follow the charging steps previously described.

• Ensure the ON/OFF power is on and the green light is on.

• Check the USB port for obstructions or other visible damage.

• Verify the device being charged is not damaged.

Section 8

________________________________________________________________________

TECHNICAL INFORMATION

SPECIFICATIONS

Battery Type

LiF

ePO4 (lithium iron phosphate) 24V, 4

0Ah

Battery Lifespan

00+ cycles (cycle = charge and discharge)

Protection Circuit

Built

n over voltage, self discharge

and short circuit protection

Fuses (replaceable)

OR 8

fuse (AC outlet) and 12

A fuse (12V DC outlet)

(See fuse chart below)

DC Input Power

29V/10

AC Wall Charger

Input: 100

0V, 50/60Hz,

300VA

Output: 29VDC, 10A,

CE approved

Rated Output Power

(amp-hours)

230V,

1000W M

ax,

Pure Sine Wave Inverter

(

40Ah)

12V DC, 12A, 180W Max (40Ah)

Two Double USB 5V, 2A, 10W Max

(

40Ah

)

Operating

Temperature

32ºF to 113ºF

0ºC to 45ºC

Dimensions

400 x

262 x 3257

Weight

16.5kg / 36.3

Certifications

CE: Low voltage directive 2006/95/EC, Electromagnetic Compatibility directive

2004/108/EC

SOLARPOD

™

PRO 1000

CHARGING TIME (from fully discharged)

Using 12

Watt Solar Panel

hours (in full sunlight)

Using AC Wall Charger (included) 6 hours

OPERATING TIME

Appliance

Solarpod™ 240

Solarpod™ Pro 1000

USB Output P

ort

iPhone*/Android** Phone recharge (6.48Wh)

36 times

145 times

iPad*/

Tablet

recharge (25Wh)

10 times

times

12V Output Port

12V Fan (35W)

6.5 hours

25.5 hours

12V Cooler (50W)

4.5 hours

18 hours

12V Flat Screen 19" TV (70W)

3.2 hours

12.5 hours

Inverter

Outlet

LED Camp Lights (3W)

66 hours

272 hours

Small

Refrigerator

(40W)

5 hours

20 hours

Laptop battery (50Wh) recharge

4 times

16 times

LED Projector (60W)

3.3 hours

13.5 hours

32''LCD TV (90W)

2.2 hours

9 hours

*iPhone is a trademark of Apple Inc.

**Android is a trademark of Google Inc.

NOTE: Data is approximated and based on the maximum power consumption.

SOLARPOD

™

PRO 1000

Fuse Reference Chart

110V, 1000W Unit AC Fuse

Amp Fuse

230V, 1000W Unit AC Fuse

6.3A

Amp Fuse

12V DC Output Fuse

Amp Fuse

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sunbird Solar Solarpod Pro 1000 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info