12
LEAK TEST
WARNING
Read the instrucons before installaon.
WARNING
The device may not be used in the event of a leak. When the unit is turned on, shut o the gas supply and check the unit before using
again.
WARNING
The recommended frequency of tubing or exible tubing tesng (at least once a month and each me the cylinder is replaced) and the
need for regular replacement, if indicated on the tubing or exible tubing. If it shows signs of cracking, cracking or other damage, it must
be replaced with a new hose of equal length and quality
WARNING
1) Read the instrucons before installing;
2) Do not connect the gas cylinder directly to the unit without the regulator.
3) The hoses or the exible hose must be replaced within the prescribed intervals.
4) Use only the gas type and bole type specied in this manual.
WARNING
Do not connect the gas cylinder to the unit without a regulator.
Use only the specied gas and bole type.
EN
WARNING
• When the ignion ame doesn’t ignite or if it’s exnguished, turn the control to “OFF”. It needs to be in OFF posion for at least 5
minutes before ignion can be aempted again. Ensure that the control is in OFF posion before igning the gas heater again.
• If a new gas bole has been newly connected, let gas pipe air escape through ignion ame hole for at least one minute.
• When igning the ame, ensure that the variable control is pressed the whole me while ignion buon is pressed. The variable con-
trol can be released once ignion ame is burning.
• You can observe and control the ignion ame through the lile round window with sliding cover situated at the boom of the radia-
on shade. The ignion ame can also be lit with a match. Slide the sliding cover to the side in order to ignite the ignion ame through
