Plug in the unit to a socket. Make sure the power
ght is flashing, which means it's in standby status.
Press button "On" on the control panel or the remote controller to switch on the heater .
T o s witch off the heater , press the button " Of f" on the control panel of the heater . W hen p ress the "Off" button on the contr
panel of the h eater , the blue indicator light is off, and the remotrol is unfunctional. T o press "Off" button
will only swift the appliance into standby status, and the blue indicator light is flashing.
The unit must be placed with the clearance of 100cm to the w all and 30cm to the ceiling .
The heater must be installed at least 1,8m above the floor .
The unit must be securely placed on a horizontal and flat surface.
The un it is at high temperature during operation. It k eeps hot for a period after sh ut down. Pote ntial danger would occur whe
touching it during this period.
5.
Don't place the unit close to curtain and/or other flammable objects.
Dont' cover the unit with anything during operation or a short time after it's shut down.
he power supply cord on the unit.
The unit must be handled with care, and avoid of vibration or hitting.
The unit must be securely grounded during operation.
When damaged, the unit must be repaired by professional reparing team.
11. If the supply co rd is damag
ed, it mu st be replaced by the manufacturer , i ts service ag ent or similarl y qualified persons in order
The heater must not be located immediately below a socket
When assembling, keep clear from any board or flammable material.
not use this heater with a programmer , timer o r any other device that switches the hea ter on automatically , since a fire risk
exists if the heater is covered or positioned incorrectly .
This appliance is not i ntended for use by p ersons (including children)
lack of experience and knowledge, unless they have been given sup ervision or instruction co ncerning use of the appliance by
a person responsible for their safety .
16. Children should be supervised to e
nsure that they do not play with the appliance.
The unit is fo r household use only . It's not al lowed to use in building site, greenhouses, barn or s table where there's flamm
The head of the unit is at high temperature during operation. Unplug th
Don't use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
Don't use this unit in place where causticity or volatile air exists, i.e. dust, steam, gas, etc.
it as a cloth drier or towel drier .
22. Dont' use this unit as a sauna heater .
23.
Don't use this unit as a room heater of heat storing.
Don't use this unit in place of animal propagating and raising.
Don't use this unit in heating system of hot air centre.
Don't immerse this unit into water for cleaning.
The unit should be plugged in a socket, which is easily visible and reachable.
T wo Dark p oints may exist on th e surface of the heating elements, o r the surface of t he heating element may turn white during
e first few minutes after it's turned on. T his is normal, and may not aff ect the performance of the unit
Unplug the unit before cleaning. It should be wiped with wet cloth. Don't use too much water .
Plug in the unit to a socket. Make sure the power
supply is same as rated. W hen press the "On" button on the c ontrol panel,
ght is flashing, which means it's in standby status.
Press button "On" on the control panel or the remote controller to switch on the heater .
T o s witch off the heater , press the button " Of f" on the control panel of the heater . W hen p ress the "Off" button on the contr
panel of the h eater , the blue indicator light is off, and the remotrol is unfunctional. T o press "Off" button
will only swift the appliance into standby status, and the blue indicator light is flashing.
The unit must be placed with the clearance of 100cm to the w all and 30cm to the ceiling .
The heater must be installed at least 1,8m above the floor .
The unit must be securely placed on a horizontal and flat surface.
The un it is at high temperature during operation. It k eeps hot for a period after sh ut down. Pote ntial danger would occur whe
Don't place the unit close to curtain and/or other flammable objects.
erwise there will be a danger of catching fire.
Dont' cover the unit with anything during operation or a short time after it's shut down.
he power supply cord on the unit.
The unit must be handled with care, and avoid of vibration or hitting.
The unit must be securely grounded during operation.
When damaged, the unit must be repaired by professional reparing team.
ed, it mu st be replaced by the manufacturer , i ts service ag ent or similarl y qualified persons in order
The heater must not be located immediately below a socket
When assembling, keep clear from any board or flammable material.
not use this heater with a programmer , timer o r any other device that switches the hea ter on automatically , since a fire risk
exists if the heater is covered or positioned incorrectly .
This appliance is not i ntended for use by p ersons (including children)
with reduced physical, s ensory or mental c apabilities, or
lack of experience and knowledge, unless they have been given sup ervision or instruction co ncerning use of the appliance by
nsure that they do not play with the appliance.
The unit is fo r household use only . It's not al lowed to use in building site, greenhouses, barn or s table where there's flamm
The head of the unit is at high temperature during operation. Unplug th
e unit and wait till it's cool before cleaning.
Don't use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
Don't use this unit in place where causticity or volatile air exists, i.e. dust, steam, gas, etc.
it as a cloth drier or towel drier .
Don't use this unit as a room heater of heat storing.
Don't use this unit in place of animal propagating and raising.
Don't use this unit in heating system of hot air centre.
Don't immerse this unit into water for cleaning.
The unit should be plugged in a socket, which is easily visible and reachable.
T wo Dark p oints may exist on th e surface of the heating elements, o r the surface of t he heating element may turn white during
e first few minutes after it's turned on. T his is normal, and may not aff ect the performance of the unit
Unplug the unit before cleaning. It should be wiped with wet cloth. Don't use too much water .
supply is same as rated. W hen press the "On" button on the c ontrol panel,
T o s witch off the heater , press the button " Of f" on the control panel of the heater . W hen p ress the "Off" button on the contr
panel of the h eater , the blue indicator light is off, and the remotrol is unfunctional. T o press "Off" button
The un it is at high temperature during operation. It k eeps hot for a period after sh ut down. Pote ntial danger would occur whe
erwise there will be a danger of catching fire.
ed, it mu st be replaced by the manufacturer , i ts service ag ent or similarl y qualified persons in order
not use this heater with a programmer , timer o r any other device that switches the hea ter on automatically , since a fire risk
with reduced physical, s ensory or mental c apabilities, or
lack of experience and knowledge, unless they have been given sup ervision or instruction co ncerning use of the appliance by
The unit is fo r household use only . It's not al lowed to use in building site, greenhouses, barn or s table where there's flamm
e unit and wait till it's cool before cleaning.
T wo Dark p oints may exist on th e surface of the heating elements, o r the surface of t he heating element may turn white during
e first few minutes after it's turned on. T his is normal, and may not aff ect the performance of the unit
Downloaded from www.Manualslib.com manuals search engine