682535
18
Zoom out
Zoom in
Vorherige Seite
1/124
Nächste Seite
18
Q700 M/F/R Rev.A
ENGLISH
6.0 Baeries, charging and range
6.1 Baeries
Baeries are the power source for almost all of the modern
mobility products available today. The design of baeries used
in mobility products is signicantly dierent to the baeries
used to start a car for example. Car baeries are designed
to release a large amount of power over a short period of
me, whilst mobility baeries (commonly called deep cycle
baeries) release their power evenly, over a long period of
me. Therefore, due to the lower producon volumes and
increased technological requirements, mobility baeries are
typically more expensive.
Commonly two 12 volt baeries are used together in a
mobility product, giving a total voltage of 24 volts. The size
of the baery (e.g. its available power) is expressed in amps
per hour e.g. 70amp/hr. The higher the number, the bigger
the baery size, weight and, potenally, the greater the
distance you can travel. Sunrise Medical only t as standard
maintenance free baeries into these types of wheelchairs.
This type of baery uses a method of carrying the electrolyte
commonly referred to as ‘gel’, that is held within the baery
case. As the name implies, no maintenance is required other
than regular charging. You can safely transport this type of
baery without fear of acid spilling. Furthermore, they are
approved for transportaon on aircra, trains and ships.
CAUTION!
Do not t car baeries to the wheelchair. Fit only deep cycle,
maintenance free mobility baeries.
When the baeries are worn out, take them to the local
authority disposal point.
Do not expose any part of the baery to direct heat (i.e.
naked ame, gas re).
Be extra cauous to reduce the risk of dropping a metal tool
onto the baery. It could spark or short circuit the baery
or other electrical parts that may cause an explosion. Also
take o all personal metal eects and dangling objects when
working on the baery.
Return the baeries back to Sunrise Medical or directly to
the baery manufacturer for recycling, when they no longer
hold charge.
The baery terminals need to be checked regularly for
signs of corrosion. If any corrosion is apparent, then clean
the terminals completely and re-grease the terminal using
Vaseline petroleum jelly, not ordinary grease. Ensure that
the terminal nut and bolt, cable clip and exposed cable are
completely covered with jelly.
DANGER!
Do not expose any part of the baery to direct heat (i.e.
naked ame, gas re).
Be extra cauous to reduce the risk of dropping a metal tool
onto the baery. It could spark or short circuit the baery
or other electrical parts that may cause an explosion. Also
take o all personal metal eects and dangling objects
when working on the baery.
5.10 Seat Memory Posion (Sedeo Ergo only)
The control system on the Q700 M/F/R has 4 predened seat
memory posions. Each memory locaon has a set of factory
seat posioning presets:
1. Relax funcon.
2. Lie down funcon.
3. Seat funcon
There is a 4th Memory posion (Custom Posion) that can be
used as a customized seat posion. The Seat actuators are all
working with a feedback system to track their posions and
movements.
This is important:
a. to reach the required memory posion.
b. to prevent mechanical clashes of the seat.
c. to operate the actuators especially towards the memory
posions in an ergonomic, smooth and safe way.
Although there is one free programmable seat Memory
posion, all predened Memory posions, if not suitable
for the user, can be changed and customized to the needs
required.
The soware takes into account the range of the available
mechanical movements and also all safety aspects.
Seat funcon:
The seat funcon as described in no.3 in the text above is a
predened ‘standard’ seat posion.
It also creates the possibility to always return to this ‘standard’
seat posion when you are using other memory posions
(Relax or Lie down). This can be achieved by pulling the
joysck backwards.
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sunrise Medical Quickie Q700 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info