12
INSTALLATION
Warning
• CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN THE SUNSHOWER.
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
• The Sunshower Pure has a power consumption of 1300 Watt. Do not connect
any heavy current using equipment to the same circuit.
• The Sunshower must be connected to a (preferably separate) circuit that is
protected with a 16A residual current device (RCD).
• Using the shower before the Sunshower has been installed is prohibited.
• Check if the voltage indicated on the appliance (230 V) corresponds to the
mains voltage in your home before you connect the appliance.
• Take the main fuse out of your fuse box (in the case of screw locks/ automats)
or switch off the main fuse before starting with the installation.
• Ensure that all the electrical connections and connection cables between the
various devices and any extension cables comply with regulations and also
comply with the operating instructions.
• For a detailed overview of the installation read the installation manual. This is
supplied in the Sunshower box, can be found at www.sunshower.nl or via the
QR codes.
