Please do not use an extension cord, since it could come
to a fire hazard and overheating.
In order to prevent an overload, please do not use power
strip, where other devices are connected to it.
Do not allow any water in the unit. If the unit gets wet, the
use should be discontinued immediately.
The plug must be securely mounted in the socket, since it
could lead to overheating. Contact your dealer if repair is
required please.
The device has an overheating protection which
automatically shuts down the heater in case of overheating.
Once the unit has cooled, it automatically switches on
again.
The convector must not be placed directly under a wall
socket.
Warning: In order to avoid overheating, do not cover
the heater.
Please do not use timer or any other device to start the
convector automatically. There is a fire hazard if the appliance
is covered or positioned incorrectly.
Installation
Assembly for floor
Attach to the base of the heater using the 4 tapping screws provided, taking care to ensure that they are located correctly
in the bottom ends of the heater. See fig.1
Fig.1
