Temperature display in °C
Humidity display in %
Speed level display
Filter change indicator Anion display
Speed button
On-/Off-button
Installation
• Please turn the appliance upside down (see picture 1) and turn the filter cover anti-clockwise to take it
off (see picture 2).
• Please remove the packaging from the HEPA- and activated carbon filter and put the filter into the
appliance (see picture 3). Please put the filter cover back onto the appliance and turn it clockwise until
the stop.
Picture 1 Picture 2 Picture 3
• Please turn the appliance upside down again and connect it tot he power outlet. Air inlet and air outlet
should both have a distance of at least 30cm to walls and objects, e.g. furniture. Please do not place
the appliance near heating sources.
Operation
• Operating voltage: With AC/DC adapter: 100-240V~, 50-60Hz, 2,5W
Without AC/DC adapter: 5V
• Please connect the appliance to the power outlet and press the on-/off-button to turn on the appliance.
When you press the speed button, you can choose between two levels: low and high speed. The low
speed is indicated by a horizontal line on the display while the high speed is indicated by two horizontal
lines.
• During operation, the appliance will display the room temperature in °C and the humidity level in %, one
at a time, automatically. The anion display and the filter change indicator are light up constantly. When
the filter change indicator is blinking on the display, the filter needs to be changed. Please disconnect
the appliance from the power outlet and follow the instructions from the segment “installation” to change
the filter.
• Sleep mode: Press the speed button for three seconds to activate the sleep mode. During sleep mode
only the on-/off-button is lighted and both speed and noise are low. To change back to normal operation,
press on any button.
