1 Handle 7 Power cord mount
2 Control panel 8 Lower filter grille
3 Air outlet 9 Rubber stopper
4 Castor 10 Rubber stopper cover
5 Upper air filter grille 11 Power cord
6 Exhaust hose opening
Exhaust hose installation
• Place the unit on a flat surface near a power socket, but at least 50cm away to other objects (see pic.1)
• Connect the exhaust hose adapters with one end each of the exhaust hose by turning. Then, fix the
exhaust hose at the back of the portable local air conditioner (see pic.2).
• Temporary exhaust hose installation: Please lead the free end of the exhaust hose out of the window
(see pic.3).
• Exhaust hose installation with window kit: Depending on your type of window, insert the window kit
horizontally or vertically into your window. Lead the exhaust hose through the hole at the window kit
(see pic.4).
• Make sure that the outlet is not blocked to prevent damage to the unit.
• The exhaust hose should not be bent.
Pic.1 Pic.2 Pic.3 Pic.4
Control panel
1 Power 11 Indicator for high fan speed
2 Mode 12 Indicator for low fan speed
3 Sleep mode 13 Timer indicator
4 Temperature - 14 Display
5 Temperature + 15 Sleep mode indicator
6 Timer 16 Cooling mode indicator
7 Fan 17 Dehumidifying mode indicator
8 Remote control receiver 18 Fan mode indicator
9 Water tank indicator 19 Power indicator
10 Compressor indicator
1. POWER: Press the button to turn the unit on or off. The unit automatically starts in cooling mode with low fan
speed.
