• Do not use multiple sockets or extension cords.
• Please do not leave the appliance unattended.
• Do not attempt to repair, disassemble or change the
appliance by yourself.
• Please be careful of hot surfaces and do not touch
them as they might cause burns.
• The use of accessory not recommended by the
manufacturer, e.g. time switches, may cause harm.
• Only operate the appliance on a flat, stable and
heat-resistant surface.
• Remove the appliance from the wall socket when it
is not in use, before cleaning, when moving and in
case of malfunctions. Pull on the power plug, not on
the power cord.
• Never use the appliance with wet hands.
• Do not insert any objects into the appliance as this
may cause electric shocks, fire or damages to the
appliance.
• Do not place the heater directly under a power
socket, near curtains, drapes or other flammable
materials as well as walls and other objects. Keep a
distance of at least 12cm to walls and 2m to objects.
• Never immerse the appliance, it’s cord and plug into
water or other liquids.
• Warning: In order to avoid overheating, do not
cover the heater!
SYMBOL FUNCTION
“OFF” OFF
“FAN” Fan only, no heat
“I” Low heat output
“II” Full heat output
Thermostat:
Turn clockwise to increase the heat output.
Operation:
• Plug the heater into a suitable power outlet [observing all the instruction regarding positioning and switch on.
To use the fan only function:
• Please turn the control dial to “FAN”. The fan will blow out air at room temperature.
• If the fan does not operate, the ambient room temperature is cooler than the built-in thermostat “OFF” level.
Please turn the thermostat dial gradually clockwise and the fan will start blowing.
• As soon as the fan starts, the light in the front of the machine will illuminate.
To use the machine for heating:
• Please turn the control dial to “I” for low heat and “II” for full heat.
