Bedienungsanleitung Suntec Klimatronic Heat Ray Carbon 3000 (Seite 11 von 89) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

767561

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

objects.

•Never immerse the appliance, it’s cord and plug into

water or other liquids.

Warning: In order to avoid overheating, do not

cover the heater!

Installation

1. There are 4 brackets and fasteners inside the packaging which are to be used for the installation. Furthermore, in the

canal of back side of the appliance there are 4 square fastener washers 25×25mm. Take the square washers and fasten

2 brackets to the canal on the backside of the heater using the screws.

2. Fasten the brackets at the appropriate distance of each other (45-55cm).

Two other brackets are to be fastened using the fasteners at the appropriate distance on the wall parallel to the

floor (At least 1.8 m from the floor and at least 0.5 m from the ceiling).

4. Join the brackets on the appliance with the brackets, fastened on the wall, with the help of figured screw-nuts. Install

the heater under necessary angle (in the direction to the area being heated).

Install the appliance strict in horizontal position only.

Safety Distances: Minimum distances required for safety

Minimum distances from wall corners: 40cm

Minimum distances from coverage area and other objects: 100cm

Right and wrong positions

Direct your appliance towards the most appropriate angle.

Do face the unit to the window, glasses etc. as the heater primarily heats the locations onto which its light falls. Prevent the

loss of directed heat through the windows.

Operating

Step 1: Plug the power cord into the outlet.

Step 2: Click rocker switch to ▬ position and press Open/Close once, the digital screen shows P.0 which means power on.

Step 3: Press Open/Close twice, the digital screen shows P.1 which means first power setting.

Step 4: Press Open/Close 3 times, the digital screen shows P.2 which means second power setting.

Step 5: Press Open/Close 4 times, the digital screen shows P.3 which means second power setting.

Step 6: After the function is on, 1-24 hours timing shutdown can be adjusted. The digital screen showing 01 indicates

timing one hour, 02 indicates timing two hours, etc.

Remote control

Definition of the buttons on the remote control

The functions of the appliance may be controlled via the buttons on your remote control and LCD screen. You may also

control some of the functions of your heater through the buttons on the front side of the heater.

1000W: First heating level. After turning on the appliance, you can choose low heating level.

2000W: Second heating level. After turning on the appliance, you can choose moderate heating level.

3000W: Third heating level. After turn on the appliance, you can choose high heating level.

Timer. After the function is on, 1-24 hours timing shutdown can be adjusted. The digital screen showing 01 means one hour,

02 means two hours, etc

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Suntec Klimatronic Heat Ray Carbon 3000 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info