a socket-outlet.
•When scrapping the heater, follow the regulations
concerning the disposal of oil.
•The heater should not be used in a room, of which
the floor area is less than 5 m².
•Use this heater only as described in this manual.
Any other use not recommended by the
manufacturer may cause fire, electric shock, or
injury to persons.
•To avoid the risk of electrical shock, fire or injury to
persons, always make sure that the heater is
unplugged from the electrical outlet before
relocating, servicing or cleaning it.
•The use of accessory not recommended by the
manufacturer, e.g. time switches, may cause harm.
Warning: In order to avoid overheating, do
not cover the heater!
Components
Safety Control (Thermal Cut-Out)
This model has two levels of over heat protection:
1) Automatic thermal cut-off: Switches off the heater in the event of overheating or malfunction and resets
once the temperature drops to a normal level.
2) Thermal fuse: In the event that the automatic thermal cut-off fails to operate the heater has a further
safety device. This is a non-resettable switch which will require the unit be returned to an Approved
Service Agent for replecement.
If overheating or malfunctions continue, return the heater to your retailer for examination.
Operation
Place the heater in an upright position on a flat, steady, stable, heat-resistant surface. Make sure there is
nothing flammable or heat sensitive within 1 meter (40 inches). Operating the heater in any other position
could cause a hazard.
Insert the plug into a suitable wall outlet on an A.C. power supply having the same voltage as that show on
it’s rating label after turning the thermostat knob counter-clockwise to the minimum position
