• Remote control:
1. ”ON/OFF” On/Off power button
2. “24H” 1-24 h timer
3. “MODE” 3 modes: cool, warm, hot
4. “LOCK” Child lock
5. “AUTO” Open window sensor
6. “Delay” On/Off timer
7. “W.Timer” Week timer
8. “+” Value increase
9. “-” Value decrease
10. “Set” Setting of current time
(excl. 1xCR2025 battery)
• Connect the unit to the power supply and press the on/off switch (O/I) at the back of the appliance. An
acoustic signal sounds and the display will light up for 3 seconds.
• Setting of day and time:
Set the current day of the week and the time before proceeding with the operation. To do this, press the
"LOCK" button on the remote control. The current room temperature is shown on the display.
o To set the weekday, please press “SET“. “I/W“ lights up and you may choose the weekday with
“+“ and “-“ from 1 to 7 (1=Monday, 2=Tuesday, 3=Wednesday, 4=Thursday, 5=Friday,
6=Saturday, 7=Sunday).
o Press „SET“ again. „II/H“ lights up and you may set the hour with “+“ und “-“ from 01 to 00 (01=1
o‘clock, 02=2 o‘clock, ..., 23=23 o‘clock, 00=0 o‘clock).
o Press „SET“ again. „Fan/M“ lights up and you can set the minutes with “+“ and “-“ from 00 to 59
minutes.
Note: If no further operation is performed within five seconds after "SET" has been pressed, the unit
switches to standby mode.
• Mode selection:
o Turn the unit on with . The unit starts with cool air. The symbol lights up.
Note: During initial operation, possible smoke or odours caused by production-related residues
are normal. This will disappear after further operation.
o If you press the mode button , the mode changes to warm air. The symbols and
light up.
o If you press the mode button a second time, the mode changes to hot air. The symbols and
light up.
o If you press the mode button a third time, the mode will change back to cool air. The symbol
lights up.
• 1-24h timer:
o While the unit is turned on, press the timer button to automatically switch off the unit after
the set time. Alternatively, you may use the button „24H“ on the remote control.
o Press the same button to set the time from 00-24 hours. If you choose 00, the timer is
deactivated. An active timer is displayed with the symbol .
• On/Off timer:
o In standby mode, you can set times at which the unit should automatically turn on and off. This
function can only be operated by remote control.
o Press “LOCK“ in standby mode. The display lights up. Press “Delay“. and “I/W“ light up.
Now set the turning on time with “+“ and “-“ from 00-24 hours.
