Bedienungsanleitung SunTech CT40 (Seite 3 von 52) (Englisch)

704206

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

80-0067-00-MO-RevJ 2019-01-30 SunTech CT40 User Manual | 3

Welcome to the SunTech CT40

Thank you for choosing the SunTech CT40 for accurate spot-checking of vital signs.

The SunTech CT40 is designed to be simple and efficient to use and the CT40 features:

• mobility for improved and compact efficiency in a cost-effective package

• automatic BP checks

• averaging of multiple BP readings

• optional use of stethoscope for traditional auscultatory BP measurement

• robust memory

• connection to EMR system

• multiple options for pulse oximetry and temperature measurement

SunTech CT40 Description and Operation

The CT40 vital signs device can perform automatic blood pressure, pulse oximetry and body temperature

measurements for clinical professionals. For measuring blood pressure, a blood pressure cuff is placed around the

patient’s non-dominant upper arm. The cuff is inflated automatically, and blood pressure is determined by the

oscillometric method—which senses pressure waves in the artery when occluded by pressure in the cuff.

Measurement of the frequency of the pressure waves enables heart rate to also be measured. The pulse oximetry

function non-invasively measures the patient’s percent oxygen saturation of arterial hemoglobin using principles of

plethysmography via a SpO2 sensor placed on the patient’s finger. Temperature can be measured using one of two

different kinds of temperature probes. The oral/axillary/rectal temperature probe contains a thermistor that

generates a voltage based on changes in temperature, and these voltages are recorded by the temperature circuitry.

The touchless infrared temperature probe detects radiated infrared energy from the temporal artery. The CT40 is a

portable device, approximately 205 x 190 x 140 mm in size and weighs approximately 1440 g without battery. Control

buttons allow the user to stop/start a BP measurement, save a set of measurements to memory, change between BP

modes, and return to the home screen. There is also a selection knob that is used to scroll and select different device

options. The backlit LCD display shows the user device status and measurement information. The device uses a

microprocessor with software, which is not accessible to the user. The unit is powered by a single rechargeable

lithium-ion battery at the rear of the device. Two USB-A port connections can be used to connect, an optional printer,

barcode scanner or Wi-Fi dongle. There is also RJ11 Ethernet port for network connectivity, and a mini-USB port used

to connect the device to a PC or laptop for advanced device configuration.

Note: For purposes of this manual, the SunTech CT40 (Model 260) may be referred to as “the SunTech CT40,” “the

CT40” or “the device”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

SunTech CT40 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von SunTech CT40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info