Bedienungsanleitung SunTech CT40 (Seite 35 von 52) (Englisch)

704206

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

80-0067-00-MO-RevJ 2019-01-30 SunTech CT40 User Manual | 35

The Memory Delete icon and Check icon will flash in sync with the Selection Knob. All other values on the

screen will be blank.

Press the Selection Knob again to delete all measurements or rotate the knob clockwise until the X icon flashes

and press the Selection Knob to cancel the deletion.

EMR Transmissions

Section 4 covers the basics of sending measurements to EMR. Here are more details.

Validating Patient ID with EMR

Scan the patient’s barcode ID with your barcode scanner. If your SunTech CT40 is connected to an EMR, a verification

query will automatically be sent to the EMR to confirm the validity of the patient ID. If the EMR responds that the

patient ID is valid, then the patient ID icon, field values and Check Icon will flash four times.

If the EMR responds that the Patient ID is invalid, then the Patient icon field, field values and X icon will flash six times

and a message will appear in the Patient ID field indicating that the Patient ID entered is not valid.

NOTE: The Patient ID must be validated by the EMR before any vital signs measurements can be sent to the EMR.

Sending Measurements to EMR

Sending measurements to an EMR will work only if your SunTech CT40 has been configured to connect to an EMR.

After scanning a valid Patient ID, and taking vital signs measurements, press the Memory Button . The EMR

icon and Check Mark Icon will start flashing. Press the Selection Knob to send the data to the EMR. If

the measurements are delivered to the EMR successfully, you will see the EMR Message Icon and the Check

Mark Icon flash four times.

If the EMR has a problem receiving the measurements, the EMR Message icon and X icon will flash eight

times and you will hear 4 short beeps. You will see a message indicating the nature of the problem, such as:

“Rejected” or “Rejected for an error.” This message occurs when the device is connected to the network but the EMR

rejects the message. A corresponding message will appear in the Patient ID field during a three-second period when

the Message Icon and X icon flash on and off.

“No response (time out).” This message occurs when the device is connected to the network but the EMR is not

responding. It also can occur if network connectivity is lost. If there is a network connection, the SunTech CT40 will

continue to try to transmit the message every 10 seconds. A message in the Patient ID field will alert you that another

attempt to send the message will be made in 10 seconds. If network connectivity is lost, you will see a corresponding

message in the Patient ID field, and the device will continue trying to reestablish a connection and send the

measurements at intervals set during EMR setup. If problems persist, you may wish to contact your facility’s

information technology department. As a backup, the patient’s measurements are saved in the device memory when

the memory button was pressed and can be retrieved using the procedure detailed in the beginning of Section 9.

Note: After the memory button is pressed, all values to be stored to memory will flash off and on twice, along with the

check mark icon, memory icon and memory location identifier. After flashing, the display will revert to null values for the

patient ID and all measurement data, and the check mark icon will flash off and on twice more.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

SunTech CT40 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von SunTech CT40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info