19
Method II: Learning remote control codes from original TV/device remote control
If you are not able to find or fully download the remote control codes for your remote control through Internet, you can use the learning method to
transmit the codes from your original remote controls to RKM-520.
1. Select a learning device key you want for RKM-520 to learn from (e.g. TV)
2. Long press a selected device key (e.g. TV) for 3 seconds, (LED light comes on)
3. Release the device key (e.g. TV)
4. Press the key of the RKM-520 that you want to learn from original remote control device (e.g. TV – power key), the LED light on RKM-520 will
keep flashing slowly. (It means it is really to receive signal from the original device.
At the learning mode, the code must be learned one key code at the time.
Note: Setting apart the original remote control from DKM-520 about 5cm in range. Ensure the original remote control’s IR transmitting lens is
facing DKM-520’s IR transmitting/learning port
5. Then long press a (e.g. power) key of the original remote control. When the LED light stays on, on RKM-520 it means the code is learned and
repeats steps 4 and 5 for other keys. If the LED light flashes rapidly, it means it is failed to learn the code, and need to repeat the steps 4 and 5.
6. Repeat the steps 4 and 5 to continue learning progress.
