6
7
8
• Before using the vacuum cleaner, make sure that the dustbag, motor protection filter and outlet filter are correctly in
place. Missing or incorrectly installed filters can damage the motor of your vacuum cleaner.
• vNext, correctly replace the dust cover and lock into position.
• Place the vacuum cleaner in a horizontal position.
• Pull out the power cable as far as you need. The yellow marker on the power cable shows the recommended cable
length. Do not pull the power cable out past the red marker.
• Put the plug into a plug socket.
• Do not pull on the power cable! To avoid pulling on the power cable when using the vacuum cleaner, turn the
appliance off briefly, and plug it into a nearer plug socket.
GB
16
USING YOUR APPLIANCE
USING YOUR APPLIANCE
• Turn the vacuum on and off using the power button.
• If you want to reduce suction even further, open the ventilation holes in the suction hose using the slider.
• When vacuuming, especially when using the vacuum cleaner on soft materials (e.g. textiles), always begin on a low
suction setting, and increase suction slowly as needed.
• Use the sliding suction power control to adjust the suction of your vacuum
cleaner to the desired level.
• When using your vacuum cleaner for the first time, you may see some
smoke and the appliance may emit a smell. This is normal, and will
disappear with further use of the vacuum cleaner.
