Bedienungsanleitung Superior RD-401 (Seite 8 von 12) (Deutsch)

573255

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

• Never use the device when it has been damaged, has fallen off or fails to work perfectly.

• Check the device, power cord and mains plug regularly for any visual damage. If any damage has

been detected, do not use the device under any circumstances. Do not attempt to repair the device

yourself.

• Repair work must only be carried out by qualified and specialized staff.

• Only use the device for the intended use.

• The device is only for use in private households and not designed for commercial use.

DEVICE OVERVIEW

1. Rest foot

2. Connector for rest foot

3. Pedestal

4. Blocking ring

5. Inner tube

6. Pedestal cover

7. Fixing screw

8. Control

9. Motor

10. Rear safety guard

11. Impeller

12. Front safety guard

13. Setting knob for impeller

14. Retaining ring

15. Motor spindle

WHEN USING FOR FIRST TIME

• Take all the device components out of the packaging and remove all packaging material and

enclosures.

• Remove the screws from the rest foot parts. Assemble the rest foot together in the shape of a cross.

• Place the pedestals with the rest foot connector onto the assembled rest foot. Be careful to ensure

the holes in the connector are correctly aligned over the screw threads of the rest foot.

• Insert the screws through the holes and thereby connect the rest foot to the pedestals. Ensure the

screws are screwed tightly. CAUTION: the screws must not be canted!

• Loosen the blocking ring by turning anti-clockwise and then pull it completely away from the

pedestals. Insert the pedestal cover with the rectangular spaces underneath and over the

pedestals. Pull out the inner tube. Now reposition the blocking ring over the pedestals and turn it to

secure it (clockwise).

• Push the control firmly onto the inner tube. Use one hand to keep the inner tube steady, to ensure

that it does not get pushed downward under the pressure. Turn and secure the fixing screws in

place.

• Remove the rubber protection from the motor spindle shaft. Screw in the retaining ring of the motor

spindle.

• Position the rear safety guard on the motor. Be careful when doing so to ensure the vertical squares

of the safety guard are positioned over the plastic nipples of the motor. Also ensure that the bore

in the area of the safety guard is pointing downward. Now screw the retaining ring back onto the

motor spindle and ensure it is secured.

• Now insert the impeller onto the motor spindle. Be careful to ensure that the squares on the inner

sides of the impeller are positioned over the diagonally situated splint of the motor spindle.

• Screw the fixing screws of the impeller onto the motor spindle. CAUTION: the fixing screws are

screwed in an anti-clockwise direction, namely to the left! Keep the impeller secured while doing so.

• Place the front safety guard onto the rear safety guard. To do so, attach a connector to the top of

the rear safety guard. Be careful when doing so to ensure both the lower holes of the safety guard

are aligned. Insert screws in front through both holes and secure these with the screw nut. Now

lock the four clamping devices in place to ensure both safety guards are securely connected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Superior RD-401 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info