Bedienungsanleitung Superior SP 5521 (Seite 39 von 44) (Deutsch)

573267

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

MENU SYSTEM / OTHER FEATURES

It should be thought that Prog-00 is the lowest pro-

gramme (like Prog-100). If any programme is inserted

to Prog-00, the programmes under that programme

space shift one up, and Prog-99 is adjusted to the ﬁrst

frequency value of VHF1 (44 MHz).

If Prog-00 is inserted to any programme space, all

the programmes under that space shift one down and

Prog-99 is erased, and Prog-00 is adjusted to the ﬁrst

frequency value of VHF1 (44 MHz).

„CANCEL“ function cancels the activated „INSERT“

process.

For „DELETE“ process it is pressed to yellow button,

(“NAME”, “INSERT” and “AUTOSTORE” functions

are inactive). Pressing yellow button again erases the

selected programme from the programme list, and the

programmes below shift one up. Prog-00 is adjusted to

the ﬁrst frequency value of VHF1 (44 MHz). Pressing

blue button cancels the activated “DELETE” process.

To enter Autostore menu, press to the blue button. To

learn the features of this function see „AUTOSTORE“

below.

Autostore

Autostore, searches and stores all channels automa-

tically on your TV, according to the transmission of

programme systems in your area.

Programme item is used in order to store the channels

after Autostore, as from a required programme. In

default the programme number is set to the following

programme after the last set programme. By using “F”

or “E” button the number can be changed, in addition

to change number digit button or double digit button

can be used too.

To cancel AUTOSTORE before starting, press “TV”

button. To select “START” use “

“ or “ “ button

and press “F” or “E” button. To cancel AUTOSTORE

during running press “F” or “E” button.

After Autostore is ﬁnalized, a programme list will

apper on the screen. In the programme list you will see

the programme numbers and names assigned to the

programmes.

OTHER FEATURES

TV Status

Programme Number, Programme Name (or AV), (they

are displayed on the upper left of the screen) and

Sleep Timer (shows the time left on the upper right

screen if enabled). In stereo options the sound indicator

is displayed with them too. They are displayed after

programme change during 3 seconds.

Programme Number

Programme Name (5 characters)

These OSD’s are displayed when a new programme is

entered by digit button, by pressing “P<P” button, or by

“

“ or “ “ button, or by “ ” button.

Programme Swap (P<P)

This button is used to reenter to the preceding entered

programme again. Pressing “P<P“ consecutively allows

to swap into two last entered programmes.

Double-digit (- -)

This OSD is displayed when the “Double-Digit“ button

pressed in place of the programme number indicator.

After then, in order to enter a programme it must be

pressed to two digit consecutively. When it is late to

press any digit button this function will be ignored and

the display will be erased. In the same way it must not

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Superior SP 5521 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info