GB
Important notice:
Prior to using this device for the first time, we recommend
cleaning it by boiling and discarding water once as per the
following instructions. This will remove any dust or residue
remaining from manufacture.
• Place the base station on a stable, level and heat-resistant
surface. Please be sure that the device cannot slide or tip
over.
• Open the cover by pushing the cover-lock-button and
pulling the cover handle up at the same time.
• Fill the tank with clear water. The water level must be
between both water level marks (0,5L / Max.) of your unit.
The device can overheat if the water level is too low. Boiling
water can splash out if the water level is too high.
• Close the cover; the device will automatically switch off
when the water boils only if the cover is closed.
• Place the device on the base station and connect the power
plug to a power outlet.
• Please be sure that the opening to pour fluids does not face
toward a person as hot steam escapes from this opening
during boiling.
• Switch the main switch to “1“, the control light will light up,
indicating that the device is functioning. The water will now
be heated.
OVERVIEW /
HANDLING YOUR UNIT
11
OVERVIEW
(1) Filter
(2) Cover
(3) Cover
-Lock-Button
(4) Control Light / Switch
(5) Handle
(6) Base Station
(7) Casing
(8) Water level Indicator
HANDLING YOUR UNIT
1
7
6
5
2
3
4
8
• Please be sure that the cover is tightly closed during boiling.
Danger of Burns!
• After the water has come to a boil, the device will
automatically switch off. The switch will jump back to “0“,
the control light will go out.
• After heating the water, wait for a moment until the water
no longer bubbles. Do not open the cover during boiling or
pouring.
• The heating process will be shut off immediately if the
device is lifted from the base station. The device will switch
off.
• The water boiler is equipped with overheating protection.
This will interupt the heating process of the device if it is
switched on without any water in the tank. In this case, the
device must cool off for at least 15 minutes prior to filling
the tank with water and re-starting the heating process.
• Pull the power plug out of the power outlet if this device is
not in use.
